検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Series-GSTA

駐車場およびドック用COおよびNO2トランスミッター – 出力および校正選択可能

  • モデル番号の末尾に -LCD を追加してオプションの内蔵LCDディスプレイを追加(例:GSTA-C-LCD)
  • 産業用グレードの交換可能なCOまたはNO2センサー
  • GSTAモデルで現場選択可能な電流または電圧出力
  • LCDなしモデルのセットアップおよび校正用サービス表示ツール
Series-GSTA
販売元 ¥ 57,088
駐車場およびドック用COおよびNO2トランスミッター – 出力および校正選択可能 Series-GSTA Series-GSTA
loading all models
製品の概要
  • 応用例 建設と維持管理, HVAC
  • カバレッジエリア 5000から7500平方フィート
  • ドリフト 年間<5%の航空
  • 電気接続 端子台付きコンジットノックアウト
  • エンクロージャータイプ IP64
  • 材料 ガラス充填ポリカーボネート
  • 動作温度(最高) 122 °F
  • 動作温度(最低) -4 °F
  • 出力詳細 GSTA: スイッチ切替可能 4-20 mA(ループ電源)、0-5 V @ 5 mA、または 0-10 V @ 5 mA;スイッチ切替可能 0-5 V/1-5 V および 0-10 V/2-10 V;スイッチ切替可能 正常出力または逆出力
  • 出力信号 電流、電圧
  • 相対湿度 15~90% RH 定常、0~99% RH 断続
  • センサー寿命 2年
  • センサータイプ フィールド交換可能な電気化学
  • シリーズID Series-GSTA
  • 最大保管温度 68 °F
  • 保管温度(最低) 32 °F
  • 電源タイプ AC / DC
  • 供給電圧 電流:10から35V直流、電圧:15から35Vdc / 15から29V²
  • 重量 1 lb

Supported Applications

The Dwyer Series GSTA Carbon Monoxide (CO) and Nitrogen Dioxide (NO<sub>2</sub>) Gas Transmitters monitor gas concentration in underground parking garages and loading docks. The CO transmitter measures exhaust from gasoline engines, while the NO<sub>2</sub> transmitter is designed for diesel engine applications.

Operating Conditions & Performance

The Series GSTA operates within an ambient temperature range of -4 to 122°F (-20 to 50°C). For best sensor life, storage should be maintained between 32 to 68°F (0 to 20°C). The unit is rated for humidity levels of 15 to 90% RH constant and 0 to 99% RH intermittent. Performance specifications include:

  • Accuracy: CO: ±2% FS; NO<sub>2</sub>: ±3% FS, at the time of calibration.
  • Resolution: CO: 1 PPM; NO<sub>2</sub>: 0.1 PPM.
  • Response Time: <45 s to 90% CO; <25 s to 90% NO<sub>2</sub>.
  • Sensor Lifespan: Field replaceable electrochemical sensors with a typical lifespan of 4 years.
  • Coverage Area: 5,000 to 7,500 sq ft typical.

The housing is constructed from UV resistant glass filled polycarbonate and carries an IP64 enclosure rating. The unit weighs 1 lb (0.45 kg).

Configuration Options

The Series GSTA offers configurable measurement ranges, output signals, and calibration options to accommodate specific installation needs.

  • Measurement Ranges:
    • CO: Switch selectable 200 or 500 PPM; adjustable from 0 to 50 PPM up to 0 to 599 PPM.
    • NO<sub>2</sub>: Standard range of 10 PPM (0 to 10 PPM).
  • Output Signals: Switch selectable options include:
    • 4-20 mA (loop powered)
    • 0-5 V @ 5 mA or 0-10 V @ 5 mA
    • Switch selectable 0-5 V/1-5 V or 0-10 V/2-10 V
    • Normal or reverse output configuration.
  • Power Requirements:
    • Current output: 10-35 VDC
    • Voltage output: 15-35 VDC or 15-29 VAC
  • Electrical Connection: Removable terminal block with knockouts for conduit fitting.
  • Calibration & Display Options:
    • Span and zero adjustments via onboard push-buttons (LCD model only) or using the optional A-449 remote LCD display.
    • The A-449 display indicates when a sensor needs replacement.

Key Product Differences

Dwyer Series GSTA models are distinguished by the gas sensed and available options:

  • Gas Type: Models are designated for Carbon Monoxide (CO) or Nitrogen Dioxide (NO<sub>2</sub>). CO units feature switch-selectable ranges, while NO<sub>2</sub> units utilize a standard 10 PPM range.
  • LCD Display Option: Variants with the "-LCD" suffix include an onboard display for calibration and status monitoring. Non-LCD models require the optional A-449 remote LCD display for these functions.
  • Duct Mounting: Models designated with a "-D" option are configured for duct mounting, utilizing a kit that includes an air flow pitot tube, air filter with barbed connections, and tubing components. Wall mount dimensions differ from duct mount configurations (Wall: 3-45/64 x 3-1/8 x 4-17/32 inches; Duct: 2-15/64 x 2-55/64 x 3-59/64 inches).
  • Field Calibration: Models with the "-FC" suffix indicate field calibration capabilities or configurations.
ja-JP
ja_JP
設定を保存する