検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

PHE4200-Series

クリアエポキシボディ、ゲル充填コンビネーションAlpha®電極

  • 5種類の電極スタイル
  • 0~14 pH全範囲をカバー
  • 透明エポキシボディ構造
  • 高速応答:1秒未満で95%達成
PHE4200-Series
販売元 ¥ 37,600
クリアエポキシボディ、ゲル充填コンビネーションAlpha®電極 PHE4200-Series PHE4200-Series
loading all models
製品の概要
  • 筐体材質 エポキシ、PP
  • インピーダンス 50 MΩ
  • 測定タイプ pH
  • pH測定範囲 0から14のpH
  • プロセス接続サイズ 該当なし
  • プロセス接続タイプ 該当なし
  • プロセス温度(最高) 140 °C
  • プロセス温度(最低) 0 °C
  • 応答時間 1秒未満で95%
  • センサータイプ 該当なし
  • シリーズID PHE4200-Series
  • 温度センサーの種類 該当なし

Supported Applications

The Omega PHE-4200 Series consists of gel-filled, combination pH electrodes designed for laboratory applications. The series covers the full measurement range from 0 to 14 pH and is intended for use across a process temperature span of 0 to 100°C (32 to 212°F). These clear epoxy-bodied sensors are supplied with an instruction sheet and stored in soaker bottles or rubber boots containing potassium chloride solution to maintain electrode moisture.

Operating Conditions & Performance

The PHE-4200 Series operates within a process temperature range of 0 to 100°C (32 to 212°F). The series achieves a response time where 95% is reached in less than 1 second. Each electrode features an Ag/AgCl reference system and utilizes a polypropylene liquid junction. At 25°C, the internal resistance for all models ranges from 50 to 80 MΩ.

Key Performance Specifications

  • Measurement Range: 0 to 14 pH; 0 to 100°C (32 to 212°F)
  • Response Time: 95% in Less than 1 Second
  • Internal Resistance (R): 50 to 80 MΩ at 25°C
  • Reference System: Ag/AgCl reference with polypropylene liquid junction
  • Cable Length: 750 mm (2.5')

Maintenance and Storage Requirements

To ensure electrode longevity, the PHE-4200 Series must be kept moist. Electrodes are shipped stored in a soaker storage bottle or rubber boot filled with potassium chloride solution; white crystals may form at the tip but should be dissolved by rinsing with distilled water before use. For long-term storage, electrodes should remain in their provided container. If the original solution evaporates, pH buffer 4.0 or pH buffer 7.0 is recommended for refilling. Distilled or deionized water must not be used for storage as it will drastically reduce electrode lifespan. Should an electrode dry out, soak it up to 2 hours in pH buffer 4.0 solution; extended drying periods may cause permanent damage.

Configuration Options

The series offers five distinct electrode styles configured for specific laboratory needs, all featuring a clear epoxy body and BNC connector standard. The available configurations include general purpose, double junction, flask size, flat surface double junction, and semi-micro designs.

Model Configurations

  • PHE-4201: General purpose; 150 mm (6 in) length; 12 mm (0.47 in) diameter
  • PHE-4202: Double junction; 150 mm (6 in) length; 12 mm (0.47 in) diameter
  • PHE-4222: Flask size; 300 mm (12 in) length; 9.5 mm (0.37 in) diameter
  • PHE-4272: Flat surface double junction; 150 mm (6 in) length; 12 mm (0.47 in) diameter
  • PHE-4232: Semi-micro; 150 mm (6 in) length; 6 mm (0.24 in) diameter

All models include a Certificate of Quality guaranteeing adherence to stringent quality control standards and carry RoHS compliance. The series also supports the PHA-D1 accessory, a 500 ml (1 pint) bottle of deionized water.

Key Product Differences

Variants within the PHE-4200 Series differ primarily by physical dimensions and junction design to accommodate specific vessel geometries or sample volumes. The standard length is 150 mm (6 in) for most models, while the flask size variant extends to 300 mm (12 in). Diameters range from 6 mm (0.24 in) for semi-micro applications up to 12 mm (0.47 in) for general purpose and double junction styles.

Junction configurations vary between standard single-junction designs, double junctions for enhanced reference stability, and a flat surface design specifically engineered for measuring pH on solid or viscous surfaces. All variants share the same clear epoxy housing material, BNC electrical connection, and 750 mm (2.5') cable length.

ja-JP
ja_JP
設定を保存する