検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

ITHX-SD-Series

温度・湿度用チャートレコーダー

  • チャーティングWebサーバーアプリケーション
  • メールまたはテキストメッセージによるアラーム
  • 一般的なSDカードに数年分のデータを記録
  • 温度
ITHX-SD-Series
販売元 ¥ 118,294
温度・湿度用チャートレコーダー ITHX-SD-Series ITHX-SD-Series
loading all models
製品の概要
  • AC 어댑터 작동 온도 0~40 °C
  • 承認 CE, FCC-B
  • バッテリー寿命 백업 배터리 수명: 최대 60시간, 읽기 간격 1분
  • バッテリー作動温度 -18 ~ 55 °C
  • バッテリーのサイズと種類 알칼라인 9V
  • 認定 NIST 추적 가능한 교정
  • コンフィグレーション 내부 웹 UI
  • データインターフェース 이더넷
  • データインターフェースに関する注意事項 이더넷 : (RJ45) 고정 또는 자동 협상 10/100BASE-T, AUTO MDI/MDIX 지원 프로토콜: TCP, UDP, SNMP, SMTP, NTP, ARP, ICMP, DHCP, DNS, HTTP, Telnet
  • 表示に関する注意事項 16자리, 6mm (0.23”)
  • フォームファクター 벽 브래킷 마운트
  • 高さ 1.44 in
  • ヒステリシス ± 1% RH
  • 入力タイプ 외부
  • 長さ 3.56 in
  • ロギングモード 고정 간격
  • 材料 316 스테인리스 스틸, 스테인리스 스틸
  • 測定タイプ 상대 습도, 온도
  • 非直線性 ± 3%
  • 測定回数 2
  • リレーの数 2
  • 動作温度(最高) 60 °C
  • 動作温度(最低) 0 °C
  • 相対湿度精度 ± 2.75 % 습도(RH)
  • リレー出力 1.5 A @ 30 Vdc
  • 繰り返し精度 ± 0.1%
  • 応答時間 온도: 5~30초, 상대습도: 8초
  • RH測定範囲 0 ~ 100% RH
  • RH分解能 0.1%, 12비트
  • サンプル、マックス 85k 샘플, 간격 1초
  • シリーズID ITHX-SD-Series
  • ソフトウェア Windows 운영 체제 호환, Ethernet OPC 서버를 통한 펌웨어 업그레이드, iConnect: Ethernet 인터페이스 구성 소프트웨어, iLog: MS Excel에서 자동 데이터 로깅용 매크로
  • 最大保管温度 85 °C
  • 保管温度(最低) -40 °C
  • 供給電流 0.5 A
  • 電源注記 AC 전원 어댑터(포함), 정격 출력: 9 Vdc @ 0.5 A, 입력: 100~240 Vac, 50/60Hz, 백업 배터리: 9 Vdc, 알카라인
  • 電源タイプ DC/배터리
  • 供給電圧 9 ~ 12 Vdc
  • 温度精度 ± 0.5 °C
  • 温度の再現性 ± 0.1 °C
  • 温度分解能 0.1 °C, 14비트
  • 重量 0.86 lb
  • 幅 2.93 in

Supported Applications

The Omega iTHX-SD Series (iServer MicroServer) functions as a network-enabled temperature and humidity virtual chart recorder. Designed for industrial environments, the unit monitors and records temperature, relative humidity, and dew point over an Ethernet network or the Internet using standard web browsers without special software installation.

Operating Conditions & Performance

The iServer unit operates within an ambient temperature range of 0 to 60°C (32 to 140°F). Storage conditions are rated from -40 to 85°C (-40 to 185°F). The device includes a back-up battery allowing data logging for up to 2 days without external AC power.

Performance specifications vary by sensor type and range:

  • Relative Humidity Accuracy (at 25°C, non-condensing): ±2.75% from 10 to 90%; ±3% from 5 to 10% and 90 to 95%; ±4% from 0 to 5% and 95 to 100%. Non-linearity is ±3%, hysteresis is ±1% RH, and repeatability is ±0.1%.
  • Temperature Accuracy (Wand Probe): ±0.5°C (±1°F) for 5 to 45°C (41 to 113°F); up to ±1°C (up to ±2°F) for 0 to 5°C and 45 to 60°C (32 to 41°F and 113 to 140°F).
  • Temperature Accuracy (Industrial Probe): ±0.5°C (±1°F) for 5 to 45°C (41 to 113°F); up to ±1.5°C (up to ±2.7°F) for -40 to 5°C and 45 to 124°C (-40 to 41°F and 113 to 255°F).
  • Response Time: RH is 8 seconds, tau 63%; Temperature ranges from 5 to 30 seconds, tau 63%.

Data resolution is 0.1%, 12-bit for humidity and 0.1°C, 14-bit for temperature. The included 2GB SD flash memory card supports up to 8 months of data storage at 1-second recording intervals or 7 years at 10-second intervals.

Configuration Options

The series offers configurable probe options and connectivity features tailored to specific installation needs:

  • Sensor Probes: Available configurations include a standard wand probe (iTHP-W-6) or industrial probes with 316 SS housing in lengths of 51 mm (2") or 137 mm (5"). Dual-probe options allow simultaneous monitoring via a DB9 "Y" connector adaptor.
  • Connectivity: Features an Ethernet port (RJ45) supporting fixed or auto-negotiating 10/100BASE-T with Auto MDI/MDIX. Supported protocols include TCP, UDP, SNMP, SMTP, NTP, ARP, ICMP, DHCP, DNS, HTTP, and Telnet.
  • Outputs & Alarms: Two relay outputs (1.5 A @ 30 Vdc) are programmable for temperature or humidity high/low set points with optional latching requiring manual reset. The unit serves active web pages with real-time readings and JAVA applet charts.
  • Power & Environment: Input is 9 to 12 Vdc via a safety-qualified AC adapter (nominal output 9 Vdc @ 0.5 A, input 100 to 240 Vac). Probe cable operating temperatures range from 0 to 80°C for wand probes and -40 to 125°C (-40 to 257°F) for industrial probes.
  • Accessories: Options include porous polyethylene probe caps (for wet environments), porous stainless steel probe caps with 5 um porosity (for dusty, pressurized <35 psi environments), extension cables up to 40', and NIST traceable calibration certificates or kits.

Key Product Differences

The series is distinguished by the included probe configuration:

  • iTHX-SD: Includes a standard wand probe (203 mm / 8") with a 152 mm (6") cable and DB9 connector.
  • iTHX-SD-2: Includes an industrial probe, 51 mm (2"), with a 0.9 m (3') cable and DB9 connector.
  • iTHX-SD-5: Includes an industrial probe, 137 mm (5"), with a 3 m (10') cable and DB9 connector.
  • Dual-Probe Models (-WD, -2D, -5D): Include two probes configured for simultaneous measurement. The iTHX-SD-WD includes two wand probes; the iTHX-SD-2D combines a wand probe with a 51 mm industrial probe; the iTHX-SD-5D combines a wand probe with a 137 mm industrial probe.
ja-JP
ja_JP
設定を保存する