日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
BARE-SH-DH-OV-ELEMENTS
セラミックビーズ熱電対素子
- J、K、T、Eタイプ熱電対を用意
- 2000 °F以上の温度に耐える高温セラミック絶縁体
- 標準長さ12インチ、その他の長さも利用可能
製品の概要
- シリーズID BARE-SH-DH-OV-ELEMENTS
Supported Applications
The Omega Ceramic Beaded Thermocouple Elements series provides precise temperature measuring elements assembled from high-grade materials. These sensors are designed for applications requiring thermocouples checked against standard temperature-millivolt curves to assure calibration accuracy.
Operating Conditions & Performance
Omega's ceramic beaded thermocouple elements meet or exceed ANSI Special Limits of Error and EN 60584-2: Tolerance Class 1. The series supports multiple insulation types with distinct temperature ratings:
- X C Insulation: Rated to 1200°C (2200°F)
- S H, D H, and O V Insulators: Rated to 1600°C (2900°F)
- F S Insulators: Rated to 1200°C (2200°F)
Note: These ratings apply to the insulation only; users must check operating limits of the wire. The standard overall length for listed configurations is 300 mm (12").
Configuration Options
The series offers a broad configuration envelope across thermocouple types, wire sizes, and insulator geometries.
Sensor Types & Wire Sizes
- Type J: Iron-Constantan
- Type K: CHROMEGA®-ALOMEGA®
- Type T: Copper-Constantan
- Type E: CHROMEGA®-Constantan
- American Wire Gauge (AWG): 8, 14, 20, and 24 AWG options are available.
Insulator Configurations
The series supports the following insulator styles to accommodate specific well or tube IDs:- Bare Wires (No Insulators): Available for 8, 14, 20, and 24 AWG.
- Single Hole Round (SH) Insulators: Provided with specific ODs and Well IDs per wire size.
- Double Hole Round (DH) Insulators: Available for dual-wire configurations across all listed AWG sizes.
- Fish Spine (FS) Insulators: Single hole options available in FS-260, FS-200, and FS-110 profiles depending on wire size.
- Double Hole Oval (OV) Insulators: Available for 8, 14, and 20 AWG configurations.
Ordering & Customization
Optional lengths are available. When ordering, the last digits of the part number indicate length in inches or fractions; users may change these to show actual desired length. For orders over 5', consult Sales Department for pricing.
Key Product Differences
Variants within this series differ primarily by insulator geometry, wire gauge, and thermocouple type combination. The "To Order" table defines specific model numbers such as Bare-8-J-12 (8 AWG Type J with no insulators) or DH-1-14-K-12 (14 AWG Type K with double hole ceramic bead insulators). For R, S, and B thermocouples using RAT, SAT, BAT series elements, users are directed to visit the manufacturer online. Detailed dimensional data for specific bead sizes is available via the Insulator Dimensional Chart in the source documentation.
PDFとマニュアル
ベアDH-1SH-1FS-260FS-200FS-110OV-1-814202430-JKTENRSB-12カスタム