検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Series-CCT60-70

CCT60/70 歪んだ交流波形用真の実効値電流変成器

  • 迅速な設置のための一体型取付フランジ
  • ソリッドコアまたはスプリットコア構成
  • ジャンパーで選択可能なレンジ
  • 真のRMS
Series-CCT60-70
販売元 ¥ 12,406
CCT60/70 歪んだ交流波形用真の実効値電流変成器 Series-CCT60-70 Series-CCT60-70
loading all models
製品の概要
  • 精度 ± 1 %
  • 電気出力 0~20 mA
  • エンクロージャーの定格 UL94 V-0
  • 周波数 10~400 Hz
  • 入力タイプ 備考 フィールド選択可能;最大200 A(モデルによる)
  • 絶縁 2000 V
  • 材料 ABS
  • 測定タイプ 現在
  • 動作温度(最高) 158 °F
  • 動作温度(最低) -22 °F
  • 出力詳細 4~20 mA、真の実効値 (True RMS)
  • 相対湿度 0~95%、非結露
  • 応答時間 90%まで250 ms
  • シリーズID Series-CCT60-70
  • 電源タイプ DC
  • 供給電圧 24 Vdc

Supported Applications

The Dwyer Series CCT60/70 True RMS Current Transformers are designed to provide true RMS outputs on distorted AC waveforms. These devices serve as a low-cost alternative for measuring power and monitoring the operation of fans, pumps, and other equipment in Building Automation Systems (BAS) and HVAC applications. The series is specifically suited for nonlinear loads or noisy circuits where standard averaging methods may be inaccurate.

Operating Conditions & Performance

The Series CCT60/70 operates within an ambient temperature range of -22 to 158°F (-30 to 70°C) and supports humidity levels from 0 to 95% (non-condensing). The measurement frequency covers 10 to 400 Hz with a response time of 250 ms to 90%. Accuracy is rated at 1%, and the units provide an isolation voltage of 2000 V. Power requirements are specified as 24 VDC nominal.

Configuration Options

The series offers configurable measurement ranges via three jumper-selectable options to reduce ordering risks, with amperage capabilities up to 200 A depending on the model. The output signal is a true RMS 4-20 mA current loop.

Housing and Core Configurations

  • Solid core models: Designed for new installations where cables can be routed through the sensor opening (e.g., CCT60-200, CCT70-200).
  • Split core models: Allow installation without disconnecting existing cables (e.g., CCT60-100, CCT70-100). Users must keep split core sensors clean to ensure proper contact between mating surfaces.

Materials and Approvals

  • Housing: ABS plastic housing with a UL 94 V-0 flammability rating.
  • Certifications: CE, cULus compliant.

Model-Specific Ranges

  • CCT60 Series (10/20/50 A): Available in solid core (CCT60-200) and split core (CCT60-100).
  • CCT70 Series (100/150/200 A): Available in solid core (CCT70-200) and split core (CCT70-100).

Key Product Differences

The primary distinction within the Series CCT60/70 is the physical construction of the transformer core. Solid core models feature a continuous ring requiring cable disconnection for installation, while split core models utilize an hinged design that opens to clamp around existing conductors. Additionally, the series differentiates between two amperage range families: the 10/20/50 A configuration and the 100/150/200 A configuration, selectable via internal jumpers.

ja-JP
ja_JP
設定を保存する