한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
OSAO-Series
조절 가능한 출력 IR 센서 고온 및 디스플레이
재고가 있는 모델
- 최대 1800 °C (3272 °F)의 고온 측정
- 다양한 시야 옵션: 2:1, 15:1, 20:1, 40:1 및 80:1
- 내장 LCD 디스플레이 및 키패드 탑재
- 아날로그 출력 및 USB 2.0 디지털 사용자 선택 가능
제품 개요
- 케이블 길이 3 m
- 제어 출력 히스테리시스 리레이 출력 60V DC/42V AC RMS, 0.4A
- 데이터 인터페이스 USB
- 디스플레이 예
- 최소 방사율 0.1
- 외함 등급 IP65
- 하우징 높이 33 mm
- 하우징 길이 112.5 mm
- 하우징 폭 82.5 mm
- 본질 안전 아니
- 고립 전원 공급, *디지털 출력 및 아날로그 출력은 갈바닉 절연됨 * USB 2.0 디지털 출력에는 적용되지 않음
- 최소 작동 온도 0 °C
- 전력 소비 2.5 W
- 최대 상대 습도 0.95
- 릴레이 출력 60 Vdc
- 시리즈 ID OSAO-Series
- 분광 응답 최소 8 μm
- 저장 온도, 최대 70 °C
- 보관 온도 최소 -20 °C
- 공급 전압 12 ~ 28 Vdc
- 무게 600 g
Supported Applications
The Omega OSAO-Series consists of adjustable output, ultra-fast response fixed infrared sensors with a built-in display. These two-piece non-contact temperature measurement systems are designed for industrial applications where the sensor head detects infrared radiation emitted by target objects and analyzes it via an internal microprocessor. The series is engineered to operate in environments subject to electromagnetic interference, as the sensor head remains unaffected.
Operating Conditions & Performance
The OSAO-Series covers measurement ranges from 0°C...800 °C (1472 °F) up to 350°C...1800 °C (3272 °F), dependent on the specific model and Field of View (FOV). Accuracy varies by family: OS-AO50-* models offer ± 1% of the measured value or 3°C whichever is greater; OS-AO50H-* models provide ±1.5% of the measured value or 2°C whichever is greater; and OS-AO250-* models achieve Below 1500°C : ±0.3% of the measured value +1°C, Above 1500°C : ±0.4% of the measured value +1°C.
Response times are adjustable up to 10 sec across all families, with base speeds of 20 msec for OS-AO50-*, 60 msec for OS-AO50H-*, and 2 msec for OS-AO250-* models. The electronic enclosure operates up to 70°C. Sensor head operating limits are up to 120 °C (248°F) for standard units, up to 180 °C (356°F) for high-temperature variants, and the sensor head is rated up to 70°C alongside the enclosure for OS-AO250-* models. Storage temperature ranges from -20°C...+70°C.
Configuration Options
The series supports three primary model families with distinct spectral responses and detector technologies:
- OS-AO50-*: 8...14 µm spectral response using a Thermopile photodetector. Features Field of View (FOV) options of 2:1 or 15:1.
- OS-AO50H-*: 8...14 µm spectral response with a Thermopile detector, offering the same FOV options as OS-AO50-* but designed for higher sensor head temperatures up to 180 °C (356°F).
- OS-AO250-*: 1.6 µm spectral response using an InGaAs photodetector. Supports high-resolution FOV options of 20 : 1, 40 : 1, or 80 : 1 and includes a Laser Pilot Light (PL) sighting option.
Output configurations include user-selectable analog signals: 0-20mA, 4-20mA, 0-10V, or Thermocouple Type "K" or "J". Digital outputs feature USB 2.0 and an optional RS-232/RS-485 interface card (only one digital output possible at a time). A relay output with hysteresis is available rated for 60V DC / 42V AC RMS, 0.4A.
Power supply requirements differ by model: OS-AO50-* and OS-AO50H-* accept 12V to 28V DC with reverse polarity protection, while OS-AO250-* requires 24V DC. The electronic enclosure is constructed of Zinc with an IP65 rating; the sensor head utilizes Stainless Steel.
Adjustable Parameters
Via software or keypad, users can configure Emissivity (ε), Response Time, Clear Time (Peak Picker), Analog Output scaling, Sub Range, Unit of Temperature (°C/°F), Communication mode, and Record features. Setpoint and Hysteresis are also adjustable via the keypad.
Key Product Differences
The OSAO-Series differentiates primarily by temperature range capability, spectral response wavelength, and sensor head thermal limits. The OS-AO50-* family targets lower ranges (0°C...800 °C) with a 14 µm thermopile detector suitable for general industrial use up to 120 °C ambient at the head. The OS-AO50H-* maintains similar optical characteristics but extends sensor head operation to 180 °C.
The OS-AO250-* family is distinct in its high-temperature capability (up to 1800°C), shorter spectral response (1.6 µm) using an InGaAs detector, and inclusion of a laser pilot light for targeting. While the electronic enclosure dimensions are consistent at 112.5mm x 82.5mm x 33mm across all models, the sensor head diameter is specified as 20 mm with an overall length of 45 mm for AO50/50H variants.
Optional accessories include water cooling jackets and air purge units specifically for OS-AO250-* models (OS-AO250-WCJ-AP, OS-AO250-AP), adjustable mounts for all families, communication converters (RS-232/RS-485), and dedicated power supplies.
PDF 및 매뉴얼
소프트웨어 및 드라이버
보정
액세서리
accessories
This is a air purge unit for the sensor head of the AO250 Models IR Sensors. Strongly recommended in areas where dust may build up on the IR sensor over time.
¥75,147 / 各
0 재고 있음
This is a water cooling jacket accessory with a built in air purge for the AO250 Model IR Sensors. Recommended if ambient temperatures are near or higher then 70 °C (158 °F).
¥75,147 / 各
0 재고 있음
This is a air purge unit for the sensor head of the AO50/50H Model IR Sensors. Strongly recommended in areas where dust may build up on the IR sensor over time.
¥41,638 / 各
0 재고 있음
This is a communication PCB accessory to provide RS-232/RS-485 connectivity options to the interface of the OSAS-Series IR sensors.
¥23,829 / 各
0 재고 있음
installation hardware
This is an adjustable mount for the AO250 IR sensors sensor head. This provides an easy way to install the AO250 Models sensor and be able to change the angle of the sensor.
¥60,484 / 各
0 재고 있음
This is an adjustable mount for the AO50/50H IR sensors sensor head. This provides an easy way to install the AO50/50H sensor and be able to change the angle of the sensor.
¥46,841 / 各
0 재고 있음