検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

SAP-TC-Series

接着パッド熱電対センサー

  • 優れた柔軟性を持つシリコーンゴム製
  • 応答時間を短縮する自己粘着性の薄型裏地
  • 正確な温度測定のため、清潔な表面に直接貼り付け可能
  • 自己粘着パッドにより一度だけ表面に設置可能
SAP-TC-Series
販売元 ¥ 10,269
接着パッド熱電対センサー SAP-TC-Series SAP-TC-Series
loading all models
製品の概要
  • 電気接続 被覆除去済みリード線
  • 絶縁 PFA
  • パッド材質 シリコン
  • プロセス温度(最高) 200 °C
  • プロセス温度(最低) -50 °C
  • シリーズID SAP-TC-Series
  • 線径 24 AWG

Supported Applications

The Omega SAP-TC-Series consists of adhesive pad thermocouple sensors designed for surface temperature measurements. The integral sensor is bonded onto the inner surface of exposed silicone material to facilitate faster response on contact surfaces. Documented applications include hot plate measurements, pipe measurements, and direct connection to instrument casings or motor housings.

Operating Conditions & Performance

The series operates within a temperature range of -50 to 200°C (-58 to 392°F). The sensor construction utilizes a silicone pad with PFA-coated lead wire, specified as 24 AWG. Mounting is achieved via an adhesive surface mount style suitable for both flat and curved surfaces.

Configuration Options

The SAP-TC-Series offers configuration options across thermocouple types, pad geometry, wire lengths, and termination styles to accommodate specific installation needs.

  • Thermocouple Types: Type K, J, T, and E are available.
  • Pad Designations: SAPC models feature a pad design for curved surfaces; SAPF models utilize a pad design for flat surfaces.
  • Dimensions: SAPC pads measure 0.59 X 1.97 X 0.29 in (15 x 50 x 7.4 mm). SAPF pads measure 1.41 x 0.48 x 0.29 in (35 x 12 x 7.4 mm).
  • Wire Lengths: Standard lengths include 36, 72, and 120 inches; other lengths are available.
  • Termination: Stripped ends are standard, with other connection options available upon request.

Key Product Differences

Variants within the series differ primarily by pad geometry and thermocouple type. The model number guide follows the format SAPC-Type-Length or SAPF-Type-Length. For example, a part such as SAPC-K-72 denotes a self-adhesive silicone sensor with a pad for curved surfaces (SAPC), Type K thermocouple element, and 72 inches of PFA-coated lead wire with stripped leads. Variants ending in "I" followed by metric lengths (e.g., -1M or -2M) indicate specific meter-based configurations available within the series.

ja-JP
ja_JP
設定を保存する