검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

LTUM1-3014-Series

316 SS 미니형 튜닝 포크 레벨 스위치

재고가 있는 모델
  • PNP/NPN 출력 포크 레벨 스위치
  • 넓은 전압 공급 범위 12-55Vdc
  • 잦은 교정 불필요, 사용이 간편하며 견고하고 내구성 있는 설계. 고/저 장애 안전 모드, 안전하고 신뢰성 있음.
  • 매체의 밀도에 따른 감도 조절 가능.
LTUM1-3014-Series
시작 ¥ 75,576
재고가 있는 모델
316 SS 미니형 튜닝 포크 레벨 스위치 LTUM1-3014-Series LTUM1-3014-Series
loading all models
제품 개요
  • 승인 CE, RoHS, UKCA
  • 밀도, 최대 0.7g/cm ³
  • 전기 연결 DIN 43650 A (솔레노이드 밸브)
  • 외함 등급 IP65
  • 재료 304 스테인리스 스틸, 316 스테인리스 스틸
  • 접액부 재질 316 스테인리스 스틸
  • 미디어 호환성 정제 공정 / 냉각수, 오일 / 윤활제, 유기 용매
  • 와이어 수 3
  • 최대 작동 압력 600 psi
  • 작동 온도, 최대 80 °C
  • 최소 작동 온도 -40 °C
  • 프로브 길이 1.625 in
  • 프로세스 연결 크기 3/4인치
  • 프로세스 연결 유형 NPT 수나사
  • 공정 온도, 최대 100 °C
  • 최소 공정 온도 -40 °C
  • 시리즈 ID LTUM1-3014-Series
  • 전원 유형 DC
  • 공급 전압 12 ~ 55 Vdc
  • 진동 1 KHz
  • 점도 범위 1 ~ 10000 cSt

Supported Applications

The Omega TF280-N and TF280-P Mini-Type Tuning Fork Level Switches are designed for level detection in various industrial applications. The device utilizes a tuning fork sensor that vibrates at a specific frequency; when submerged in a medium, the vibration changes to trigger an output signal. These switches support media with Specific Gravity (S.G.) equal to 1 g/cm³, less than 1 g/cm³, and greater than 1 g/cm³.

Operating Conditions & Performance

The series is powered by DC power supply and features a magnetic test function for verifying proper installation and operation after the switch is installed. The sensing spot adjusts based on the specific gravity of the medium: it moves upward if the S.G. is lower than 1 g/cm³ and downward if the S.G. is greater than 1 g/cm³.

During a magnetic test, bringing a magnet close to the testing point causes the output status to switch from NO to NC or NC to NO, while the red LED switches ON or OFF. This function confirms that wiring and functioning are correct.

Configuration Options

The series is available in Standard Type and Extension Type configurations with distinct dimensional profiles:

  • Standard Type: Height 215mm, Diameter φ38. Includes HEX38 connection, 3/4PT process connection, stem length of 36mm, and insertion lengths associated with the standard profile.
  • Extension Type: Height 250mm, Diameter φ23. Features an insertion length of 120mm or 250mm depending on configuration.

The switches offer configurable output signals and wiring modes via a DIN Connector:

  • Output Signal Types: PNP and NPN.
  • Wiring Configuration (DIN & Cable):
    • PnP High/Max: Pin 1 (Brown) = N-, Pin 2 (Black) = L+, Pin 3 (Blue) = Output, Pin 4 (Yellow Green) = Ground.
    • NPN Low/Min: Pin 1 (Brown) = N-, Pin 2 (Black) = L+, Pin 3 (Blue) = Output, Pin 4 (Yellow Green) = Ground.

Wetted materials and the housing are constructed from 316L Stainless Steel. The process connection is specified as 3/4PT.

Key Product Differences

The series includes two primary model families identified by their output logic:

  • TF280-N: Represents the NPN output configuration variant.
  • TF280-P: Represents the PNP output configuration variant.

The model number guide follows the format: TF280-N/ TF280-P - <Model Type> - <Output Type> - <Connection Type> - <Fork Type> - <Sensing Spot Adjustment> - <Other Options>. Variations in the series address different fork designs and sensing spot adjustments required for media with varying specific gravities.

ko-KR
ja_JP
설정 저장