日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
LC8300
外径3インチスルーホール圧縮ロードセル
- 5点NISTトレーサブル校正
59 kΩシャント校正データ付き - 低プロファイル
- 全ステンレス鋼製構造
- 頑丈な産業用設計
製品の概要
- 5点校正 0%, 50%, 100%, 50%, 0%
- ケーブル長 5 ft
- 校正オプション 5点NIST
- 電気接続 ケーブル
- 電気出力 2 mV/V
- 力タイプ 圧縮
- フルスケール振れ 0.003 in
- 高さ 1 in
- 入力抵抗 360 Ω 最小
- 直線性 ±0.5%
- ロードセルタイプ 貫通穴
- 材料 17-4 PH ステンレス鋼
- 動作温度(最高) 121 °C
- 動作温度(最低) -54 °C
- 外径 3 in
- 出力抵抗 350 ± 5 Ω
- 過負荷、最大 300% FS
- プロセス温度(最高) 71 °C
- プロセス温度(最低) 16 °C
- 繰り返し精度 ± 0.1%
- 安全過負荷 150% FS
- シリーズID LC8300
- 電源注記 10 Vdc、最大15 Vdc
- 供給電圧 10 Vdc
- 熱スパン効果 ± 0.018% rdg/°C
- 熱ゼロ点効果 ± 0.009% FSO/°C
- 配線/コネクタテーブル 緑: (+) 出力; 白: (-) 出力; 黒: (-) 入力; 赤: (+) 入力
- ゼロ点/バランス誤差 ± 2%
Supported Applications
The Omega LC8300 Series consists of compact, through-hole compression load cells designed for measuring compressive forces. The series is engineered with a low profile and rugged industrial design suitable for applications including clamping forces and bolt loading.
Operating Conditions & Performance
The LC8300 operates within an ambient temperature range of 16 to 71°C (60 to 160°F) and a process temperature range of -54 to 121°C (-65 to 250°F). The load cells feature a nominal output signal of 2 mV/V with an excitation voltage requirement of 10 Vdc, up to a maximum of 15V. Performance specifications include an accuracy class of ±0.5% FSO and repeatability of ±0.1% FSO.
Thermal effects are specified as Zero: ±0.009% FSO/°C and Span: ±0.018% FSO/°C, with a zero balance tolerance of ±2.0% FSO. Each unit is supplied complete with 5-point NIST-traceable calibration data and includes 59 kΩ shunt data.
Physical Dimensions
- Overall Height (H): 25.4 mm (1.00")
- Outer Diameter (OD): 76.3 mm (3.00")
Configuration Options
The LC8300 series offers a wide selection of configurations defined by capacity and inside diameter (ID). The load cells are constructed from 17-4 PH stainless steel housing material.
Capacity Ranges
- Imperial: 0 to 1,000 lb through 0 to 100,000 lb
- Metric: 0 to 455 kgf through 0 to 45,372 kgf
Selectable Inside Diameters (ID)
The series supports selectable inside diameters ranging from 0.250" to 1.50", allowing integration into existing mechanical assemblies with specific bore requirements.
- Available ID sizes include: 0.250", 0.375", 0.500", 0.625", 0.750", 0.875", 0.938", 1.00", 1.13", 1.25", 1.38", and 1.50".
Electrical Connection & Compliance
- Cable: Includes a 1.5 m (5') 4-conductor shielded cable.
- Wire Color Code: Green (+Output), White (-Output), Black (-Input), Red (+Input).
- Approvals: NIST and RoHS compliant.
Key Product Differences
The LC8300 model number follows the format LC8300-[ID CODE]-[K], where [ID CODE] corresponds to the selected inside diameter (e.g., 750 for 0.750") and [K] represents the capacity in thousands of pounds or kilograms.
Variations are distinguished by their specific combination of ID size and load range, with availability dependent on the intersection of these parameters as defined in the series specification tables. Metric configurations are available upon consultation with engineering.
PDFとマニュアル
LC8300-2503755006257508759381.001.051.131.251.381.50-1K2K3K4K5K7.5K10K15K20K30K40K50K75K100K