日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
LC8200
2インチ外径スルーホール圧縮ロードセル
- 5点NISTトレーサブル校正
59 kΩシャント校正データ付き - 低プロファイル
- 全ステンレス鋼製構造
- 頑丈な産業用設計
製品の概要
- 5点校正 0%, 50%, 100%, 50%, 0%
- 校正オプション 5点NIST
- 電気接続 ケーブル
- 電気出力 2 mV/V
- 力タイプ 圧縮
- フルスケール振れ 0.003 in
- 入力抵抗 360 Ω 最小
- 直線性 ±0.5%
- ロードセルタイプ 貫通穴
- 材料 17-4 PH ステンレス鋼
- 動作温度(最高) 121 °C
- 動作温度(最低) -54 °C
- 外径 2 in
- 出力抵抗 350 ± 5 Ω
- 過負荷、最大 300% FS
- プロセス温度(最高) 71 °C
- プロセス温度(最低) 16 °C
- 繰り返し精度 ± 0.1%
- 安全過負荷 150% FS
- シリーズID LC8200
- 電源注記 10 Vdc、最大15 Vdc
- 供給電圧 10 Vdc
- 熱スパン効果 ± 0.036% rdg/°C
- 熱ゼロ点効果 ± 0.009% FSO/°C
- 配線/コネクタテーブル 緑: (+) 出力; 白: (-) 出力; 黒: (-) 入力; 赤: (+) 入力
- ゼロ点/バランス誤差 ± 2%
Supported Applications
The Omega LC8200 series consists of compact through-hole compression load cells designed for force measurement applications. These sensors feature a low-profile, all-stainless steel construction intended for rugged industrial environments where space is constrained or integration into existing structures requires a central bore.
Operating Conditions & Performance
The LC8200 series operates within an ambient temperature range of -54 to 121°C (-65 to 250°F). Measurement capabilities span from 0-5 lb (0-2.3 kgf) up to 0-10,000 lb (0-4537 kgf), with a nominal output signal of 2 mV/V and an excitation voltage requirement of 10 Vdc (maximum 15 V). Performance specifications include an accuracy class of ±0.5% FSO and repeatability of ±0.1% FSO.
Physical dimensions vary by capacity range: units rated for 5 to 100 lb have a height of 9.4 mm (0.37"), while those rated from 250 to 10,000 lb feature a height of 16 mm (0.63"). All models maintain an outer diameter (OD) of 51 mm (2.00") and are constructed from 17-4 PH stainless steel.
Configuration Options
The series offers extensive configurability through selectable inside diameters (ID) paired with specific capacity ratings to accommodate various mounting requirements or pass-through needs.
- Inside Diameters: Available ID codes include 125, 188, 250, 375, 500, 625, 750, 875, and 1.00 (representing inches).
- Capacities: Configurable from 5 lb to 10,000 lb.
- Cable Assembly: Each unit includes a 1.5 m (5') 4-conductor shielded cable with the following wire connections: Green (+Output), White (-Output), Black (-Input), and Red (+Input).
- Calibration & Compliance: Units come complete with 5-point NIST-traceable calibration, a 59 kΩ shunt resistor for data verification, and are RoHS compliant.
The model number follows the format LC8200-[ID]-[CAPACITY], such as LC8200-125-5 or LC8200-375-10K. Metric configurations are available upon consultation with engineering.
Key Product Differences
Variation within the series is defined by the combination of inside diameter and load capacity, which dictates both the model number and physical height profile. Lower capacities (5 to 100 lb) utilize a shorter form factor (9.4 mm / 0.37"), whereas higher capacities (250 to 10,000 lb) require an increased height of 16 mm (0.63"). Specific ID options are not available for every capacity; availability is determined by the intersection of the selected diameter and load rating as documented in the series specification tables.
PDFとマニュアル
LC8200-1251882503755006257508751.00-51025501002505001K2K3K5K7.5K10K