검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

Series-8B

1/8 DIN 온도/공정 컨트롤러, 이중 출력, 13 경보, PID, RS-485

1/8 DIN 温度/プロセスコントローラ、デュアル出力、13アラーム、PID、RS-485
  • ユニバーサル入力はプロセス送信機、RTD、または熱電対信号を受け入れます
  • オン/オフ、PID、または手動出力制御
  • 全モデルに標準搭載のRS-485
  • 最大64段のランプ/ソーク動作用ステージ制御プログラム
Series-8B
시작 ¥ 28,292
1/8 DIN 温度/プロセスコントローラ、デュアル出力、13アラーム、PID、RS-485 Series-8B Series-8B
loading all models
제품 개요
  • Accuracy ± 0.25% span ± 1 least significant digit
  • Data Interface RS-485 Modbus ASCII/RTU
  • Display Note Two 4 digit, 7 segment LED’s. PV: Red, SV: Green
  • Display Type LED
  • エンクロージャーの定格 IP56
  • 入力制御信号 0 to 20 mA
  • 入力タイプ Thermocouple, RTD, DC Voltage or DC Current
  • メモリバックアップ Non-Volatile
  • 取付方向 1/8 DIN
  • 桁数 4
  • 動作温度(最高) 122 °F
  • 動作温度(最低) 32 °F
  • 出力タイプ (B) Relay
  • 消費電力 max 5 VA
  • RTD入力範囲 JPt 100: -4 to 752°F; Pt 100: -328 to 1562°F
  • シリーズID Series-8B
  • 電源注記 100-240 VAC, 50/60 Hz; Optional 24 VDC
  • スイッチ定格 5 A @ 250 Vac
  • スイッチタイプ SPDT NO/NC, Selectable
  • 温度センサーの種類 RTD or Thermocouple
  • 熱電対入力範囲に関する注記 Type K: -328 to 2372°F; Type J: -148 to 2192°F; Type T: -328 to 752°F; Type E: 32 to 1112°F; Type W: -328 to 2372°F; Type R: 32 to 3092°F; Type S: 32 to 3092°F; Type B: 212 to 3272°F; Type L: -328 to 1562°F; Type U: -328 to 932°F
  • 電圧入力範囲 0 to 5 V, 0 to 10 V
  • 重量 15 oz

Supported Applications

The Dwyer Series 8B is a microprocessor-based temperature and process loop controller designed for mounting in enclosed panels. It provides advanced control features including PID, ON/OFF, manual, or programmable Ramp/Soak (PID) control modes. The series supports universal input configurations to monitor thermocouples, RTDs, DC voltages, or DC currents.

Operating Conditions & Performance

The Series 8B operates within an ambient temperature range of 32 to 122°F (0 to 50°C). It features a front panel rating of IP56 and complies with CE and cULus certifications. The controller displays process value (PV) in red and set point (SV) in green on dual 4-digit, 7-segment LED indicators.

Measurement accuracy is specified as ±0.25% span, ±1 least significant digit. Input ranges vary by sensor type:

  • K Type TC: -328 to 2372°F (-200 to 1300°C)
  • J Type TC: -148 to 2192°F (-100 to 1200°C)
  • T Type TC: -328 to 752°F (-200 to 400°C)
  • E Type TC: 32 to 1112°F (0 to 600°C)
  • W Type TC: -328 to 2372°F (-200 to 1300°C)
  • R Type TC: 32 to 3092°F (0 to 1700°C)
  • S Type TC: 32 to 3092°F (0 to 1700°C)
  • B Type TC: 212 to 3272°F (100 to 1800°C)
  • L Type TC: -328 to 1562°F (-200 to 850°C)
  • U Type TC: -328 to 932°F (-200 to 500°C)
  • JPt 100 RTD: -4 to 752°F (-20 to 400°C)
  • Pt 100 RTD: -328 to 1562°F (-200 to 850°C)
  • Analog Inputs (0-5 V, 0-10 V, 0-20 mA*, 4-20 mA*, 0-650 mV): -999 to 9999

*Requires a 250 Ω precision resistor across input terminals.

Configuration Options

The Series 8B is available in multiple configurations defined by supply power and dual output types. The series supports the following capabilities:

  • Housing Size: 1/8 DIN (47.80 mm width, 98.20 mm height, 79.20 mm depth).
  • Power Supply: Standard models accept 100-240 VAC at 50/60 Hz; optional low-voltage (-LV) variants support 24 VDC.
  • Dual Outputs: Configurable combinations of Relay, Voltage Pulse (14 VDC), Current (4-20 mA), or Linear Voltage (0-10 V).
  • Relay Ratings: SPDT contact configuration rated at 5 A @ 250 VAC resistive.
  • Voltage Pulse Output: 14 VDC with a maximum output current of 40 mA.
  • Current Output: 4-20 mA DC.
  • Linear Voltage Output: 0-10 V DC (available on specific model codes).
  • Communication: RS-485 interface supporting Modbus® ASCII/RTU protocol.

Key Product Differences

The Series 8B product line is distinguished by its output configuration and power supply options, identified in the model number (e.g., 8B-23, 8B-53-LV). Key distinctions include:

  • Output Combinations: Models are configured with two distinct outputs. Common pairings include Voltage Pulse/Relay, Relay/Relay, Current/Relay, and Linear Voltage/Relay.
  • Power Supply Variants: Standard models operate on 100-240 VAC; variants suffixed with "-LV" are designed for 24 VDC operation.
  • Accessories: The series supports optional accessories including a 250 Ω precision resistor (A-277), R/C snubber assembly (A-600) to protect relay outputs when driving contactors or solenoids, weatherproof enclosures (A-900/A-901), and configuration software.
ko-KR
ja_JP
설정 저장