日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
DP41-Series
1/8 DIN 高性能温度・プロセス・ひずみ計
- 追加料金なしの延長5年保証
- 6桁ディスプレイ
- 最小/最大値記憶
- 4つの絶縁オープンコレクタ出力
製品の概要
- A/D変換 デュアルスロープ技術
- 精度 ± 0.005 %
- 共通モードリジェクション 120 dB
- コモンモード電圧 1500 Vp の高電圧試験
- 電流測定範囲 0~20 mA、4~20 mA
- カットアウト寸法 45 × 92 mm
- 表示色 赤、緑
- 表示サイズ 13.7 mm (0.54 インチ)
- 表示タイプ 6桁 シングルLED
- 表示タイプ 注 赤または緑の6桁、14セグメント、13.7 mm(0.54インチ)高;4つのアラームインジケーター
- エンクロージャーの定格 IP65, NEMA タイプ 4
- フォームファクター 1/8 DIN
- 高さ 48 mm
- 入力構成 シングルエンド
- 長さ 165 mm
- ノーマルモードリジェクション 60 dB
- 入力数 1
- オフセット調整 0 ~ 999,999 または 0 ~ -99,999、プログラム可能
- 動作温度(最高) 50 °C
- 動作温度(最低) 0 °C
- 極性 ユニポーラ/バイポーラ、プログラム可能
- 消費電力 10W
- 消費電力に関する注意事項 6 W 定格、最大 10 W
- 読み取りレート 3/s または 13/s、60 Hz; 3/s または 12/s、50 Hz
- 相対湿度 95% RH、非結露
- 抵抗値の分解能 15ビット
- サンプリングレート 13 Hz (13 回/秒)
- センサーブレークプロテクション アップスケールまたはダウンスケール、プログラム可能
- センサー/送信機の電力 10 Vで30 mA;24V、25 mA
- シリーズID DP41-Series
- 設定値 4アイソレートオープンコレクタ;定格150mA、1Vシンク、30Vオープン
- スパン調整 0.00001~500,000 カウント、プログラム可能
- ステップ応答 1秒から99.9%
- 最大保管温度 85 °C
- 保管温度(最低) -40 °C
- 電源注記 115 または 230 Vac、49~400 Hz;10~32 Vdc
- 電源タイプ AC
- 熱スパン効果 ±20 ppm
- 定格精度へのウォームアップ 50分
- 重量 574 g
- 幅 96 mm
Supported Applications
The DP41 Series is a 1/8 DIN high-performance digital panel meter and controller for industrial instrumentation, with a high-resolution 6-digit display. A single platform reads a remarkably wide set of inputs - DC voltage and current, thermocouples (9 types), 2-, 3- or 4-wire RTDs, strain gages, load cells and potentiometers - so one meter family can be standardized across temperature, process, force and weight applications.
A 14-segment LED display gives clear alphanumeric messaging, and built-in alarm and control capability lets the meter act on a measurement, not just display it. Isolated RS232/RS485 communications, analog retransmission, BCD output and relay outputs are available as plug-in boards for integration and control.
The front panel is rated NEMA 4 (IP65) for wash-down and dusty environments, and the meter carries CE, UKCA and cULus marks. A red LED display is standard, with a green LED available at no charge.
Operating Conditions & Performance
The meter offers a headline accuracy of ±0.005% rdg with a 15-bit resolution and dual-slope conversion. Step response is 1 s to 99.9%, the reading rate is 3 or 13 readings per second at 60 Hz (3 or 12 at 50 Hz), and rated accuracy is reached after a 50-minute warm-up. Thermocouple and RTD resolution is 0.01°.
Thermocouple input ranges and accuracies are:
- Type J: -210 to 760°C (-346 to 1400°F), to 0.2°C (0.3°F).
- Type K: -270 to 1372°C (-454 to 2500°F), to 0.2°C (0.3°F).
- Type T: -270 to 400°C (-454 to 752°F).
- Type E: -270 to 1000°C (-454 to 1832°F).
- Type R/S: -50 to 1768°C (-58 to 3214°F).
- Type B: 100 to 1820°C (212 to 3300°F).
- Type N: -270 to 1300°C (-454 to 2372°F).
- J DIN: -200 to 900°C (-328 to 1652°F), to 0.6°C (1.0°F).
- RTD: -200 to 850°C (-328 to 1562°F), to 0.2°C (0.3°F).
DC ranges cover 0 to 100 mV, ±500 mV, 0 to 5 V, 1 to 5 V, 0 to 10 V, 0 to 100 V, ±5 V, ±50 V, 0 to 20 mA and 4 to 20 mA, and bridge excitation is available at 10 V at 30 mA or 24 V at 25 mA.
The meter operates from 0 to 50°C (32 to 122°F) at 95% RH non-condensing and stores at -40 to 85°C (-40 to 185°F). Power is 115 or 230 Vac, 49 to 400 Hz, or 10 to 32 Vdc. Analog output spans 0 to 5 V, 0 to 10 V, 0 to 20 mA and 4 to 20 mA, with dual 7 A mechanical relays available as a board option.
Configuration Options
The model number is assembled as DP41 - <Input Type> - <Power> - <Communications> - <Output> - <Accessory>, so the meter is configured input-first and then built up with power, communication and output options. Power and display options include:
- -230 - 230 Vac power.
- -DC - 10 to 32 Vdc isolated power.
- -GN - green LED display.
Output and communication capability is added through plug-in boards, which map to the suffixes in the model number:
- DP40-A3 - analog output.
- DP40-S24 - isolated RS232/485 communications.
- DP40-B - isolated BCD output board.
- DP40-R - dual 7 A mechanical relays; DP40-R4 - dual 7 A and dual 1 A relays.
Because inputs, power, communications and outputs are ordered independently, a base DP41-TC becomes a fully featured DP41-TC-230-S2A with mains power, communications and analog output, or a low-voltage DP41-E-DC-AR4 with analog output and relays.
Key Product Differences
The platform is organized first by input type. The core To Order indicators are:
- DP41-E - process voltage/current indicator.
- DP41-TC - thermocouple indicator.
- DP41-RTD - RTD indicator.
- DP41-U - universal input indicator.
- DP41-S - strain gage indicator; DP41-W - NTEP weight strain indicator.
Each is also offered as a DP41Z split-display version (DP41Z-E, DP41Z-TC, DP41Z-RTD, DP41Z-U, DP41Z-S and DP41Z-W) with a remote display. Every input model then combines with power, communication and output suffixes to form the full lineup - for example DP41-U-230-S2, DP41-RTD-DC-S4 or DP41-E-S2AR4.
Accessories include the SPC4 and SPC18 NEMA 4 (IP65) splashproof lenses, 9- and 25-pin serial connectors (DP40-9SC2, DP40-9SC4, DP40-25SC2, DP40-25SC4), the DP41-TBS bench stand and the DPP-5 1/8 DIN panel punch. The meter measures 48 H x 96 W x 165 mm D (1.89 x 3.78 x 6.5") and weighs 574 g (1.27 lb).
RoHS 2015/863 - 証明書を見る
CE認証済み
UKCA
DP41-EDP41-TCDP41-RTDDP41-U-230-230-A-230-AR4-230-GN-230-GN-A-230-S2-230-S4-230-S2-GN-230-S4-GN-A-AR4-DC-DC-A-DC-S2-DC-S2A-DC-S4-DC-GN-DC-GN-A-GN-GN-A-GN-R4-GN-S2A-R4-S2-S2A-S2AR4-S2-GN-S4-S4A-S4AR4-S4-GN-R-AR-GN-AR-GN-R-S2AR-230-R4-AR4-230-DC-AR4-DC-S4AR4-S2A-DC-230-S2A-A-230-A-S2-DC-S2-A-S2-A-S2-AR4