検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Series-4B

1/4 DIN 温度/プロセスコントローラ、デュアル出力、PID制御、64ランプ/ソーク

  • ユニバーサル入力はプロセス送信機、RTD、または熱電対信号を受け入れます
  • オン/オフ、PID、または手動出力制御
  • 全モデルに標準搭載のRS-485
  • 最大64段のランプ/ソーク動作用ステージ制御プログラム
Series-4B
販売元
1/4 DIN 温度/プロセスコントローラ、デュアル出力、PID制御、64ランプ/ソーク Series-4B Series-4B
loading all models
製品の概要
  • 精度 ± 0.25% スパン ± 1 最下位桁
  • データインターフェース RS-485 Modbus ASCII/RTU
  • 表示に関する注意事項 2つの4桁7セグメントLED。PV:赤、SV:緑
  • 表示タイプ LED
  • エンクロージャーの定格 IP56
  • 入力制御信号 0から20 mA
  • 入力タイプ 熱電対、RTD、直流電圧または直流電流
  • メモリバックアップ 非揮発性
  • 桁数 4
  • 動作温度(最高) 122 °F
  • 動作温度(最低) 32 °F
  • 出力ノート 電圧パルス:14 Vdc(最大40 mA);リレー:SPDT、5 A @ 250 Vac 抵抗負荷
  • 出力タイプ (B) リレー
  • 消費電力 最大5 VA
  • RTD入力範囲 JPt 100: -4~752°F; Pt 100: -328~1562°F
  • シリーズID Series-4B
  • 電源注記 100-240 Vac、50/60 Hz;オプション 24 Vdc
  • スイッチ定格 5 A @ 250 Vac
  • スイッチタイプ SPDT NO/NC、選択可能
  • 温度センサーの種類 RTDまたは熱電対
  • 熱電対入力範囲に関する注記 タイプK:-328~2372°F;タイプJ:-148~2192°F;タイプT:-328~752°F;タイプE:32~1112°F;タイプW:-328~2372°F;タイプR:32~3092°F;タイプS:32~3092°F;タイプB:212~3272°F;タイプL:-328~1562°F;タイプU:-328~932°F
  • 電圧入力範囲 0から5V、0から10Vまで
  • 電圧出力範囲 14 Vdc
  • 重量 15 oz

Supported Applications

The Dwyer Series 4B is a microprocessor-based temperature and process controller designed for mounting in enclosed panels. It provides advanced control features including PID, ON/OFF, manual, and programmable Ramp/Soak (64 steps) modes. The series supports universal inputs compatible with thermocouples (Types K, J, T, E, N, R, S, B, L, U, TXK), Platinum Resistance Detectors (Pt100, JPt100), and analog signals including DC voltages (0-5V, 0-10V) and currents (4-20mA, 0-20mA).

Operating Conditions & Performance

The Series 4B operates within an ambient temperature range of 32 to 122°F (0 to 50°C). Measurement accuracy is specified as ±0.25% span, ±1 least significant digit across the supported input ranges. The front panel carries an IP56 rating for protection against dust and water jets.

Input measurement ranges vary by sensor type:

  • Thermocouples: Ranges include -328 to 2372°F (-200 to 1300°C) for Type K, -148 to 2192°F (-100 to 1200°C) for Type J, and up to 3272°F (1800°C) for Type B.
  • RTDs: Pt100 supports -328 to 1562°F (-200 to 850°C); JPt100 supports -4 to 752°F (-20 to 400°C).
  • Analog Inputs: Voltage and current inputs display a range of -999 to 9999.

The controller features dual 4-digit, 7-segment LED displays: red for Process Value (PV) and green for Set Value (SV). Power consumption is maximum 5 VA. The unit includes nonvolatile memory backup.

Configuration Options

The Series 4B offers configurable dual outputs to drive heating, cooling, or alarm circuits. Available output types include:

  • Relay Output: SPDT configuration rated at 5 A @ 250 VAC resistive.
  • Voltage Pulse Output: 14 VDC with a maximum current of 40 mA.
  • Current Output: 4-20 mA (requires load resistance less than 600 Ω).
  • Linear Voltage Output: 0-10 V.

The series supports RS-485 communication using the Modbus ASCII/RTU protocol. Power supply options include standard AC 100-240V, 50/60 Hz or optional low-voltage DC 24V (indicated by "LV" in model codes). Accessories available for specific configurations include a 250 Ω precision resistor (A-277) required for certain current inputs, an R/C snubber (A-600), weatherproof enclosures (A-900, A-901), and configuration software.

Key Product Differences

The Series 4B is part of a broader family that includes the 8B, 16B, and 32B models. While all share similar control logic and input capabilities, they differ in physical dimensions and relay ratings:

  • Series 4B (1/4 DIN): Features a panel cutout of approximately 44.8 mm × 22.0 mm. The relay output is SPDT rated at 5 A @ 250 VAC resistive.
  • Series 32B: Relay outputs are typically SPST rated at 3 A @ 250 VAC resistive, with a larger panel footprint (91.0 mm × 91.0 mm cutout).

The Series 4B model number structure follows the format: Series Code - Output 1 - Output 2 - Options. For example, "4B-53" denotes a voltage pulse output (code 5) and relay output (code 3), while "4B-63-LV" indicates linear voltage output, relay output, and low-voltage power supply.

アクセサリー

accessories

Precision resistor, 250 ohm
¥2,744 / 各
0 在庫あり
R/C snubber (recommended for inductive loads like a solenoid or contactor)
¥5,479 / 各
0 在庫あり
Weatherproof enclosure, type 4X, control direct panel mounts in the front of the enclosure.
¥32,685 / 各
0 在庫あり
防水エンクロージャー、タイプ4X、制御装置をエンクロージャー内に取り付けるためのリアパネル付き透明プラスチック窓。
¥60,629 / 各
0 在庫あり

sensors

J type, 100’ on spool, FEP insulation, 200°C, black outer sheath, 24 AWG, 0.20 SQMM
¥8,929 / 各
0 在庫あり
K type, 100' on spool, FEP insulation, 200°C, yellow outer sheath, 24 AWG, 0.20 SQMM
¥16,932 / 各
0 在庫あり

signal conditioners

¥23,065 / 各
0 在庫あり
ja-JP
ja_JP
設定を保存する