日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
CN8200-Series
1/16 DIN ユニバーサル入力 オートチューンコントローラ ランプ&ソーク付き
- 現場設定可能なユニバーサル入力
- 両出力に対するオートチューニング、直接作用または逆作用
- ユーザー選択可能なセットポイントへのランプ
- 8つのランプセグメントおよび8つのソークセグメント
製品の概要
- 精度 ± 0.2 %
- 精度の詳細 ± 0.2% FS、± 1 デジット
- CMRR 100 dB
- コールドジャンクション補償 0.05°C/°C 周囲温度
- コンタクト ツイン二股接点
- 制御特性 設定点制限:熱電対およびRTDの設定範囲に制限;スケーリング範囲に制限;アラーム:高/低に調整可能;プロセスまたは偏差を選択可能;レート(微分):0~2400秒;リセット(積分):0~9600秒;サイクルタイム:0.2~120秒;比例帯:センサーのスパン1から;デッドバンド:センサーの負スパンから正スパンまで;ヒステリシス:センサーのスパン1から;オートチューン減衰:調整可能(低、標準、高);設定点へのランプ:1~9999分;オートチューン:前面パネルからオペレーター起動;手動制御:前面パネルからオペレーター起動
- カットアウト寸法 45 x 45 mm
- パネル裏側の奥行き 100 mm
- 表示サイズ 9.2 mm (0.36 インチ)
- 表示タイプ 4桁LED
- 表示タイプ 注 デュアルLED—4桁、オレンジ:プロセス表示;グリーン:メニュー/パラメータ表示;9.2 mm(0.36インチ)
- 電気接続 ネジ端子
- エンクロージャーの定格 IP65, NEMA タイプ 4X
- イベント/アラーム 1~8
- フォームファクター 1/16 DIN
- ハードウェアおよびソフトウェア要件、最小 CN8-SW(オプションソフトウェア):最小ハードウェアおよびソフトウェア要件:IBM PCまたは100%互換機、Windows 95/98/NT;RS485インターフェースまたはRS232からRS485へのコンバーター;ソフトウェア互換性:CN8200シリーズコントローラー;ソフトウェア機能:最大254台のCN8200シリーズコントローラーをサポート
- 高さ 53.3 mm
- 入力タイプ 熱電対、RTD、mA、電圧
- 入力タイプ 備考 入力タイプ:次ページの入力表を参照 デジタル入力:リモート設定値、リモート待機、またはランプ/ソークの実行および保持用 熱電対リード抵抗:定格精度のため最大100 Ω 小数点位置:選択可能
- 長さ 8.21 mm
- ループ数 0~99
- 測定タイプ 電流、温度、電圧
- 測定範囲(最小) タイプJ(鉄-コンスタンタン):-200~760°C、 タイプK(CHROMEGA®-ALOMEGA®):-270~1354°C、 タイプT(銅-コンスタンタン):-270~400°C、 タイプN(OMEGALLOY®):-268~1300°C、 タイプR(Pt/13%Rh-Pt):-50~1768°C、 タイプS(Pt/10%Rh-Pt):-50~1768°C、 タイプB(Pt/30%Rh-Pt/6%Rh):0~1820°C、 タイプC(W/5%Re-W/26%Re):0~2315°C、 タイプE(CHROMEGA®-コンスタンタン):-150~1000°C、 NNM 18%モリブデン対ニッケル-06%コバルト:0~1410°、 Platinel II:-100~1232°C、 RTD(3線式 100 Ω Pt):-200~850°C、 RTD(3線式 100 Ω Pt):-199.9~375.0°C、 0~1V:スケーラブル(-1999~9999)選択可能 1~5V:スケーラブル(-1999~9999)選択可能 0~5V:スケーラブル(-1999~9999)選択可能 0~10V:スケーラブル(-1999~9999)選択可能 10~50 mV:スケーラブル(-1999~9999)選択可能 0~50 mV:スケーラブル(-1999~9999)選択可能 0~10 mV:スケーラブル(-1999~9999)選択可能 0~100 mV:スケーラブル(-1999~9999)選択可能 4~20 mA:スケーラブル(-1999~9999)選択可能 0~20 mA:スケーラブル(-1999~9999)選択可能
- メモリバックアップ 半導体
- 入力数 1
- 動作温度(最高) 55 °C
- 動作温度(最低) 0 °C
- ランプおよびソーク 8 ランピング&ソーキング
- ランプ設定値 1~9999分
- ランプ/ソーク時間 0~9999分
- 相対湿度 90% RH、結露しないこと
- 繰り返し精度 ± 1 カウント
- サンプリングレート 10 Hz (10 回/秒)
- シリーズID CN8200-Series
- 直列モード除去 70 dB 以上
- 設定値の分解能 1カウント/0.1カウント
- 電源注記 100~250V、50/60 Hz(単相);120~250 Vdc、24 Vac/24 Vdc(オプション)
- 温度安定性 5 μV/°C 最大
- 重量 226 g
- 幅 53.3 mm
Supported Applications
The Omega CN8200 Series comprises 1/16 DIN universal temperature and process controllers designed for applications requiring precise autotuning, ramp-to-setpoint control, and multi-segment programming. The series supports field-configurable universal inputs including thermocouples (J, K, T, N, R, S, B, C, E), RTDs (3-wire 100 Ω Pt), Platinel II, voltage, current, and millivolt signals.
Key functional capabilities include:
- Ramp/Soak Control: Configurable for up to 8 ramp segments followed by 8 soak segments.
- Dual Display: Simultaneous Process Value (PV) and Setpoint (SV) indication with individual status LEDs.
- Remote Monitoring: Compatible with CN8-SW software for remote monitoring and control via RS232/485 communications options.
Operating Conditions & Performance
The controller operates within an ambient temperature range of 0 to 55°C (32 to 131°F) at a maximum humidity of 90% RH, non-condensing. The front panel features a NEMA 4X (IP65) enclosure rating.
Performance specifications include:
- Accuracy: ±0.2% FS, ±1 digit for rated accuracy conditions.
- Response Time: 10 Hz (100 ms).
- Hysteresis: Adjustable from 1 to span of sensor.
- Resolution: 1 count or 0.1 count depending on range selection.
The series supports a wide array of measurement ranges, including -270 to 1354°C (-454 to 2469°F) for specific thermocouple types and scalable electrical inputs from -1999 to 9999. Load resistance is limited to 100 Ω maximum for rated accuracy on analog outputs.
Configuration Options
Power Supply Options
The standard power supply supports a universal range of 100 to 250 Vac and 120 to 250 Vdc. An optional low-voltage configuration (-LV suffix) is available for 24 Vac/24 Vdc operation.
Input Types
The universal input capability covers the following sensor types:
- Thermocouples: J, K, T, N, R, S, B, C, E (including CHROMEGA®-ALOMEGA®, OMEGALLOY®, and W/5%Re-W/26%Re).
- RTDs: 3-wire 100 Ω Pt.
- Analog Signals: Voltage (0 to 1V, 1 to 5V, 0 to 5V, 0 to 10V), Current (4 to 20 mA, 0 to 20 mA), and Millivolt ranges.
Output Configurations
The series is available in single-output (CN8201) or dual-output (CN8202) models. Output types include:
- Mechanical Relay: 5 A @ 120 Vac, 3 A @ 240 Vac.
- Solid State Relay (SSR): 1 A continuous, 10 A surge @ 25°C.
- DC Pulse: 20 Vdc pulse output.
- Analog Current/Voltage: 4 to 20 mA (up to 800 Ω or 1000 Ω maximum depending on suffix), 0 to 5V, 0 to 10V, and various mV ranges.
Additional Options
The series supports a single additional option per controller. Available options include:
- Alarms: Single-alarm mechanical relay (-AL1), dual alarms with AC SSR (-AL2), or dual DC level alarms at 24 Vdc (-AL3).
- Communications: RS232 (-C2) or RS485 (-C4). The -C4 option can be configured for MODBUS® protocol and includes variants with digital inputs (switch closed, switch open, or 0/5V logic).
- Remote Setpoint: Switch-based or voltage-based remote setpoints.
- Transducer Excitation: Available at 15 Vdc (-XP1), 12 Vdc (-XP2), 10 Vdc (-XP3), or 5 Vdc (-XP4).
Key Product Differences
The CN8200 Series is differentiated by model number and output configuration:
- CN8201-(-*): Single-output ramp/soak controller.
- CN8202-(-*)-(-*): Dual-output ramp/soak controller, allowing independent selection of first and second output types (e.g., Relay + SSR).
The ordering suffix structure defines the specific configuration: <MODEL> - <FIRST OUTPUT SUFFIX> - <SECOND OUTPUT SUFFIX> - <LOW VOLTAGE SUFFIX> - <ADDITIONAL OPTION SUFFIX>. For example, a dual-output model with DC pulse and relay outputs configured for low voltage and an alarm would follow the pattern CN8202-DC1-R2-LV-AL3.
The series includes UL US and C UL US approvals. A 2-year warranty is standard, with OMEGACARE™ extended warranty programs available.
PDFとマニュアル
ソフトウェアとドライバー
CN82012-R1DC1T1F1FH1-R2-DC2-T2-F2-FH2-LV-AL1-AL2-AL3-C2-C4-C4-DIC-C4-DIO-C4-DIV-C4-MOD-C4-MOD-DIC-C4-MOD-DIO-C4-MOD-DIV-PVSV2-RSP1-RSP2-RSP3-XP1-XP2-XP3-XP4