検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Model-KFD0

ループ駆動型ガルバニックバリア(安全用トランスミッター用)、DINレール取付け

Loop Powered Galvanic Barrier for Safe Transmitters, DIN Rail Mount
  • ほとんどの標準DINレールに取り付け可能に設計
  • 危険区域での使用が承認済み
Model-KFD0
販売元
Loop Powered Galvanic Barrier for Safe Transmitters, DIN Rail Mount Model-KFD0 Model-KFD0
loading all models
製品の概要
  • 応用例 流体計測と制御, 産業および製造業
  • 静電容量 FM:0.042 µF、0.267 µF、0.267 µF
  • 認定 IIA(D、F、G), IIB(C), IIC(A、B)
  • 電流出力 38.2 mA
  • インダクタンス FM:0.5 mH、2.5 mH、2.5 mH
  • 入力制御信号 21から35Vdc
  • 動作温度(最高) 140 °F
  • 動作温度(最低) -4 °F
  • 出力詳細 4~20 mA
  • 出力信号 電流
  • 消費電力 150 mW
  • 応答時間 ≤ 20 µs
  • Response Time Note 0で≤20µs、800負荷で≤600µs
  • Series ID Model-KFD0
  • 温度ドリフト ≤ 0.5 µA/°C
  • 電圧出力 23.1 V
  • 重量 4.2 oz

Supported Applications

The Dwyer Model KFD0 is a loop-powered galvanic barrier designed to provide complete isolation for communication with intrinsically safe transmitters approved for use in hazardous areas. The series is specifically used to isolate voltages for HHT series applications, eliminating the need for a high integrity earth ground required by shunt type diode safety barriers.

Operating Conditions & Performance

The Model KFD0 operates within an ambient temperature range of -4 to 140°F (-20 to 60°C) with a specified temperature drift of ≤ 0.5 µA/°C. It is designed for loop-powered operation, requiring no external power supply.

  • Signal Range: Hazardous area input supports 4-20 mA (linear transmission 1-22 mA); safe area output provides a 4-20 mA signal range with transmitter voltage ≤ 30 VDC.
  • Voltage Requirements: Available transmitter voltage is ≥ 16 V for supply voltages > 21 V; the model supports up to 23.1 V (Vo) and 38.2 mA (Io).
  • Response Time: ≤ 20 µs at 0 load, and ≤ 600 µs at 800 load.
  • Power Dissipation: Maximum power dissipation is 150 mW @ 20 mA and V <24 V.

Configuration Options

The series supports DIN rail mounting on most standard rails. The physical dimensions are a height of 4-3/8 [111.20], width of 4-37/64 [116.46], and depth of 25/32 [20.00].

  • Approvals: CE, FM APPROVED (Class I, Zone 1, Groups IIC, IIB, IIA; Class I, II, III, Div. 2, Groups A, B, C, D, F, G).
  • Hazardous Area Parameters: Configured for Group IIC (A, B), IIB (C), and IIA (D, F, G) with capacitance values of 0.042 µF, 0.267 µF, or 0.267 µF and inductance values of 0.5 mH, 2.5 mH, or 2.5 mH.
  • Accessories: Aluminum DIN rail (Model A-360) is available for mounting support.

Key Product Differences

The primary configuration in the series is Model KFD0-SCS-EX1.55, described as a loop-powered galvanic barrier compatible with Dwyer Series HHT-IX transmitters. This model provides specific electrical limits for hazardous area isolation without requiring external power.

ja-JP
it_IT
設定を保存する