1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
CL3512A-Series
Simulateur et thermomètre de thermocouple à bas prix J/K/T/E
Modèles en stock
- Affichage rétroéclairé large 3 1/2 digits
- Simulateur et indicateur pour thermocouple type J/K/T/E
- Plage de -220 à 1372°C
- Double entrée T1, T2, T1-T2
- Fonction verrouillage
- Résolution d'affichage sélectionnable 0,1°/1°
- Conception résistante avec botte de caoutchouc
CL3512A-Series
Depuis
C$
498.92
Modèles en stock
L'aperçu du produit
- Accuracy ± 0.1 %
- Accuracy Detail ± (0.1% rdg + 1°C) Accuracy is specified for operating temperatures from 18 to 28°C (64 to 82°F), for 1 year, not including thermocouple error; ± (0.1% rdg + 1°C) range -60 to 1372°C [± (0.1% rdg + 2°F) range -76 to 1999°F] ± (0.1% rdg + 2°C) range -60 to -220°C[± (0.1% rdg + 4°F) range -76 to -364°F]
- Auto-Ranging 0.1° to 1°
- Auto-Ranging Note 0.1° to 1° resolution above 199.9 (°C or °F)
- Battery Indication A low battery indication is displayed when the battery voltage drops below the operating level
- Battery life 100 hr
- Display Type LCD
- Display Type Note 3 1⁄2 digit LCD with a maximum reading of 1999. Overrange: (-OL) is displayed. Zero: Automatic
- Height 195 mm
- Length 53 mm
- Operating Temperature, Min 0 °C
- Operating Temperature Note 0 to 50°C (32 to 122°F) @ <80% RH
- Polarity Automatic, positive implied, negative polarity indication
- Relative Humidity, Max 0.8
- Relative Humidity, Min 0%
- Resolution, Max 1 °C
- Resolution, Min 0 °C
- Resolution Note 0.1 (to 199.9) or 1°
- Sampling Rate 1 Hz (1 update/second)
- Simulation Accuracy Measurement Accuracy + 1°C
- Storage Temperature, Max 60 °C
- Storage Temperature, Min -20 °C
- Storage Temperature Note -20 to 60°C (-4 to 140°F), 0 to 80% RH with battery removed from meter
- Supply Voltage 9 Vdc
- Thermocouple Type J, K, T, E
- Type of RTD Signal None
- Weight 250 g
- Weight Note Approximately 250 g (9 oz)
- Width 92 mm
Description
Le calibrateur de température portatif OMEGA™ CL3512A, avec une longueur de 2 m et un prix bas, peut simuler les signaux de thermocouples types J/K/T/E. Chaque signal est configurable via les touches. Le CL3512A peut être utilisé en tant que thermomètre thermocouple double type J/K/T/E. Comprend un affichage large de 3 1/2 digits avec rétroéclairage et des sélections de verrouillage,°C/°F, et 0,1°/1°.Caractéristiques
Types de thermocouple: J/K/T/E
Plage de température: Celsius ou Fahrenheit - sélectionnable par l'utilisateur
Plages de mesure: Type K -200 à 1372°C, type J -210 à 1200°C, type T -200 à 400°C, type T -220 à 1000°C
Plage de calibration: Pareil à la plage de mesure. Plage automatique: 0,1° à 1° résolution au dessus de 199,9 (°C ou °F)
Précision de mesure: Précision est spécifiée pour les températures de fonctionnement au dessus de la plage de 18 à 28°C, pendant 1 an, ne comprend pas les erreurs du thermocouple. ±(0,1% lec + 1°C) plage -60 à 1372°C ±(0,1% lec + 2°C) plage -60 à -220°C ±(0,1% lec + 2°F) plage -76 à 1999°F ±(0,1% lec + 4°F) plage -76 à -364°F
PDF et manuels
Accessories
So ft carrying case for HH500 series
C$26.50
0 In Stock
Afficher les notes et les avis
Rated 5 out of
5
by
Otto from
Nice calibrator for thermocouples
This is the second one we bought and we are very happy with the performance. Two inputs and two outputs - for this price - can't go wrong.
Date published: 2016-05-06
Rated 5 out of
5
by
Anonymous from
Unbeatable line of instruments!
Great instrument. Accurate and reliable. Will absolutely buy again and recommend.
Date published: 2024-07-15
Rated 5 out of
5
by
MJH_VT from
A ‘must have’ instrument
Omega
Thermocouple meter / simulator
The ability to measure temperature with a thermocouple and to generate a simulated thermocouple voltage according to a selected temperature, is extremely valuable when debugging thermocouple applications. This model instrument does so at reasonable cost and with NIST traceable calibration certificate.
PROs:
1. 0.1 degree Celsius display resolution up to 200 C.
2. Simulated TC output is variable with Coarse and Fine adjustment controls on the front panel.
3. Battery life is excellent.
4. Legendary Omega precision and reliability.
CONs:
1. Simulator output range selections overlap. For example, 150C is selectable from 2 different simulator output ranges, both of which require the adjust pots to be near the end of their travel. This makes the adjustment more touchy for certain simulator output temperature settings. This is a very minor issue but a noteworthy characteristic.
Overall this is a ‘must have’ instrument for anyone working with thermocouples in applications ranging from field installations to electronics development labs.
Date published: 2023-06-24
Rated 5 out of
5
by
Jason M from
Thermocouple Meter
Great device and simple operation!!!!!!!!!!!!!!!!!!!!!
Date published: 2023-04-10
Rated 5 out of
5
by
University of Tennessee K from
Calibrator Purchase
Great Service with this company in ordering our parts
Date published: 2022-10-10
Rated 5 out of
5
by
Keith B from
Just what I was looking for!
These little units are very easy to use. For output, the dial allows you to select ranges of output, then simply fine tune the setting with the small dials. Outputs are stable and do not wonder. It also reads T/C with easy, both J and K types. I'm using it as a development similar in my lab. I wish it had a digital interface (serial, USB, etc) to make it easier to collect data. But for the price, I can't complain!
Date published: 2022-04-04
Rated 5 out of
5
by
ErikK from
Works fine, good value
Very handy instrument, easy to use for checking out connections and other equipment. Very good specs for the price. We have several of these and they have held up well.
Date published: 2016-10-04
Rated 4 out of
5
by
Anandharaj from
Omega CL3512A
I purchased for our regular calibration testing and we are happy to use the same
Date published: 2016-08-31
How quick does the temp register on the display?
Hi Stacy,
Thank you for the inquiry. Reading rate is once / second this meter. So within 2 seconds the unit should have steady value for stable input signal.
Best regards,
OMEGA
Date published: 2022-12-16
Can you tell me the county of organ
Thank you for your inquiry. Please email your request to sales@omega.com
Date published: 2024-03-19
I am looking for an instrument that let me probe thermocouples type J, we use this in cure ovens and we would like to know if the thermocouple is still reliable or not in order to keep or replace it, could you recommend me an instrument for it
Hi Francisco,
This calibrator can be used to verify a J thermocouple output if you have a stable bath at a known temperature. For more assistance with your thermocouples please forward request to TEMP@DWYEROMEGA.COM.
Best regards
Omega
Date published: 2024-03-18
How quick of a reading response can I expect going from room temperature to -85C? I'm trying to capture cooling cycle that cools down from room temp to -85C in about 4-5 seconds, and so I'm curious to now if this gauge can capture that
Hi Vass,
Update rate is 1/sec which is common with hand held meters. HH911T has 3/sec update. But most of response time will be due to the probe. Recommend to contact us at TEMP@OMEGA.COM for more details.
Best regards
OMEGA
Date published: 2023-08-07
Can either T1 or T2 be used as an output for simulating a thermocouple to calibrate a device?
Only T1 is used for sourcing Thermocouple signals on the CL3512A calibrator.
Date published: 2022-11-03
How do I turn off the "Beep" sounds when buttons are pressed on the Omega CL3512A digital thermometer?
Hi Jack713,
Thank you for the inquiry. Please forward this request to TEMP@OMEGA.COM
Best regards
OMEGA
Date published: 2024-03-19
How do you calibrate this?
Hi Jodi,
Thank you for the inquiry. Please email request for calibration procedure to TEMP@OMEGA.COM.
Best regards
OMEGA
Date published: 2023-08-07
Could this be used to calibrate a TJ96-IC310SS-116U-4-SB (WNW0204216) Thermocouple that I purchased from you recently. I did not have the thermocouple calibrated, but I am realizing that to match our our probe readings it is necessary?
Hi NickB,
Thank you for the inquiry. To compare the 2 probes you need a good accurate meter to measure the probe output signal. The CL3512A can do this. You also need a stable bath to hold the probes at constant temperature. A container of ice can provide 0 C point. Hot water bath or block calibrator can provide higher level comparison points;
https://www.omega.com/en-us/calibration/temperature-calibrators/dry-block-and-bath-calibrators/p/CL1000
Best regards
OMEGA
Date published: 2021-05-11