1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
PX119-150GI
0 à 150 psi, pression relative
Choisir une variante
Connexion électrique
Pression, max
Ajouté à votre panier
Configuration complète.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer pour recommencer
Spécifications du produit
<< Voir tous les modèles de produit| Marque |
 |
| Caractéristiques nominales du boîtier | IP65 |
| Classe de précision | > 0.25% |
| Connexion électrique | DIN 43650 C (électrovanne) |
| Câblage de sortie (broche 1) | Approvisionnement + |
| Câblage de sortie (broche 2) | Approvisionnement - |
| Effet thermique sur l'erreur d'étendue, max | 0,009 % FS/°F |
| Effet thermique sur l'erreur zéro, max | 0,009 % FS/°F |
| ID de série | PX119 |
| Matériau du boîtier | Acier inoxydable 304 |
| Matériaux en contact avec le fluide | Acier inoxydable 304, Alumine, Buna-N (NBR) |
| Poids | 70 g |
| Pression, max | 150 psi |
| Pression, min | 0 psi |
| Protection | Surtension, court-circuit, inversion de polarité |
| Précision | Précision de 0,50 % BFSL |
| Puissance électrique | 4 à 20 mA |
| Signal de sortie | Courant |
| Stabilité | <0,3 % FS> |
| Taille du raccordement au process | 1/4 po |
| Temps de réponse | 1 ms |
| Température compensée, max | 85 °C |
| Température compensée, min | 0 °C |
| Température de fonctionnement, max | 135 °C |
| Température de fonctionnement, min | -40 °C |
| Tension d'alimentation | 8 à 30 Vcc |
| Type de pression | Manomètre |
| Type de raccordement au process | NPT mâle |
| Valeur brute du poids | 0.23 |
| Vibration | 20 g (20 à 500 Hz) |
| Pays d'origine | Canada |
| Voir toutes les spécifications | |
Accessoires
Amortisseurs de pression pour se protéger contre les variations de pression
Depuis C$27.12
0 En stock
Convertisseur compact de courant ou tension analogique vers IO Link
C$245.46 / each
98 En stock
Afficher les évaluations et les avis
Rated 5 out of
5
by
Accidental Gardener from
The Little Transmitter that could...
I collect rain water in a 1000 L tote tank to use for my Greenhouse & several raised-beds. A small pump is used to recirculate the water not only to prevent stagnation but also for pH treatment to make it ready for use. The pump is then used for water delivery to the Greenhouse & raised-beds to reduce domestic water usage. This transmitter is great to monitor how well the pumping system performs. From bench testing before installation, I was very impressed with the response, repeatability & accuracy of this little unit. This is great as it does not have any zero/span adjustments. The pump has a low pressure, moderate flow delivery & I'm using a 15 psig transmitter (PX119-015GI). The Mini-DIN connector is great for easy disconnection as I will be bringing the pump & transmitter inside for the winter after the grow season is over.
Date published: 2020-08-29
Rated 4 out of
5
by
dlyman from
Awesome
I needed a pressure transmitter and looked everywhere. I found very cheap to very expensive and long ship times. I ordered the Omega. I got it in 2 days and it has worked very well
Date published: 2018-05-14
Rated 4 out of
5
by
Chris at FTS from
Easy to Install and Use
We purchased several of these in three different ranges. The first item is the ease of wiring the connector. Previous transducers used required soldering the wires to the connector terminals. There units have a simple screw lug that you simply insert the lead and screw tight in place. The time involved was less than half to complete connections.
The transducers themselves work very well.
My only minor concern is that the terminals on the transducer are exposed and can be bent easily. However, since there should be minimal need to remove the transducer connector, this is not a big concern.
Date published: 2019-03-06
Rated 5 out of
5
by
Flaco from
Pressure Transmitter
This is a rugged little piece of equipment. I'ts accurate enough for what I'm doing, has held up to sub-optimal conditions and the price is unbeatable.
Date published: 2019-02-05
Rated 5 out of
5
by
Eve B from
great product
everything worked as expected, great product it exceeded my expectations.
Date published: 2026-02-19
Rated 5 out of
5
by
OLSD microgrid from
trouble free performance
compact yet versatile, very accurate measurements. High-quality stainless-steel housing, no adapters, just straight forward performance.
Date published: 2026-02-02
Rated 5 out of
5
by
Vhramirez90 from
Exhaust treatment
I purchased this sensor for use in a biogas engine exhaust treatment system. The sensor works great and shipped in a decent amount of time.
Date published: 2025-10-13
Rated 5 out of
5
by
radBerry from
Good product for the price. Fast Shipping
Used on a large die press to monitor multiple pressure points in the hydraulic system
Date published: 2025-06-23