1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
HX300A-Series
Transmetteurs d'humidité/température
Modèles en stock
- Rapide, stable et précis
- Boîtier étanche
- Compact, facile à utiliser
- Excellente stabilité à long terme
HX300A-Series
À partir de
C$
423.81
Modèles en stock
Aperçu du produit
- Précision ±2,5 % HR ; ±0,3 °C
- Connexion électrique Presse-étoupe pour fil de 5 à 10 mm avec bornier à vis
- Caractéristiques nominales du boîtier IP65
- Stabilité à long terme Meilleur que 1 % HR par an (typique)
- Matériaux en contact avec le fluide ABS
- Température de fonctionnement, max 50 °C
- Température de fonctionnement, min 0 °C
- Temps de réponse 15 s
- Matériau du capteur Filtre fritté
- ID de série HX300A-Series
- Type d'approvisionnement électrique CC
- Tension d'alimentation 12 à 40 Vcc
- Compensation de température 0,008 % HR/°C (effet à 05 HR)
- Poids 150 g
Le transmetteur de la série HX300 est conçu pour les environnements industriels nécessitant des mesures rapides, stables et précises. Il utilise un condensateur polymère à couche mince très stable pour détecter l'humidité relative et un RTD à couche mince de haute précision pour détecter la température avec précision.
Afficher les évaluations et les avis
Rated 5 out of
5
by
Aleksandar from
Great Job
Quick response and right product information's !!!
Date published: 2023-09-11
Rated 5 out of
5
by
R Clark from
Omega Retro Fit Humidity Probe
Great experience with customer service. Was able to get a direct replacement probe.
Date published: 2023-08-30
Rated 3 out of
5
by
Vincent N from
Very tight Output Termination.
Wish the output terminal was inverted so there is more room to terminate wiring.
Date published: 2023-04-04
Rated 5 out of
5
by
Who dat from
Great product.
Very easy to set up! Also very reliable. Will purchase again.
Date published: 2022-01-01
Rated 4 out of
5
by
Nate from
Good product
I have bought several of these units over the years and have always had good results With them.
Date published: 2018-04-29
Are these compatible in a corrosive environment?
Thank you for the inquiry. No, these are not compatible in a corrosive environment.
Date published: 2023-08-28
Is there a procedure/manual to use the calibration buttons for the HX302AC?
Hi Michael
Please refer to manual for procedure;
https://assets.omega.com/manuals/M5072.pdf
Best regards
OMEGA
Date published: 2025-08-14
Are these designed to be installed in a bulkhead or throughpanel configuration? If so what is the recommended method for accomplishing this?
Hi TimMcMan,
Thank you for the inquiry. The HX302C is designed for mounting on a wall. Manual supplies detail including mounting hole location.
Best regards
OMEGA
Date published: 2022-12-05
Is this safe to use in a commercial combi-oven for creating jerky? I need to record the percentage of humidity and temperature. Oven temperature would be no more than 170F and can generate its own steam.
Thank you for your inquiry. We believe the best assistance would come from speaking to us directly at 888-826-6342 ask for the Temperature Department Mon. – Fri. (HOURS 8:30AM - 5:30PM EST).
Date published: 2024-08-20
Is there a more extensive manual for the HX303AV model? This a jumper on it to change the output range to 0 to 5V but that is not mentioned in the online manual. I'm seeing 0.4V for ambient temp reading and 0.9V for RH. Seems wrong?
Thank you for the inquiry. Manual for the HX303A; https://assets.omega.com/manuals/M5072.pdf. For more trouble shooting assistance please forward email to TEMP@OMEGA.COM.
Best regards
OMEGA
Date published: 2024-06-25
the data that I am getting to my PLC is not coming through as a percentage but rather a 4 digit number. Is there a formula that I need to apply to the data to get the information that I need? I doubt 2894 is the correct RH. Any help is greatly appreciated
Hi James,
You'll need to check the PLC scaling and adjust as needed. The 4 to 20 mA outputs of the HX303AC are scaled to represent 0 to 100 % RH and 0 to 100 C.
Best regards
OMEGA
Date published: 2023-03-01