1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
PX309-100GI
0 to 100 psi, Gauge, 4 to 20 mA, Cable
Choisir une variante
Connexion électrique
Puissance électrique
Type de pression
Ajouté à votre panier
Configuration complète.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer pour recommencer
Spécifications du produit
<< Voir tous les modèles de produit| Marque |
 |
| Caractéristiques nominales du boîtier | IP65 |
| Classe de précision | 0.1% to 0.25% |
| Connexion électrique | Câble |
| Cycles de pression | 10 million, minimum |
| Fonctions supplémentaires 1 | None |
| ID de série | PX309 |
| Largeur de bande | DC to 1 kHz |
| Matériau du boîtier | 316 Stainless Steel |
| Note sur la pression d'éclatement | -15 to 50 psig and 0 to 1000 psia: 4 times rated pressure or 25 psi whichever is greater, 100 to 10,000 psig: 5 times rated pressure |
| Poids | 154 g |
| Pression d'éclatement | 4x Full Scale |
| Pression, max | 100 psi |
| Pression, min | 0 psi |
| Précision | ± 0.25% BSL, max (Combined Linearity, Hysteresis and Repeatability) |
| Puissance électrique | 4 à 20 mA |
| Remarque concernant la pression | Pressure Overload: -15 to 50 psig and 0 to 1000 psia: 3 times rated pressure or 20 psi whichever is greater, 100 to 10,000 psig: 2 times rated pressure |
| Remarque sur la stabilité | 1-Year Stability: <0.25% FS |
| Résistance aux chocs | 50 g, 11 ms half-sine |
| Résistance d'isolation | 1 MΩ @ 25 Vdc |
| Signal de sortie | Current |
| Stabilité | ± 0.25% |
| Taille du raccordement au process | 1/4 in |
| Temps de réponse | <1 ms |
| Température de fonctionnement, max | 85 °C |
| Température de fonctionnement, min | -40 °C |
| Tension d'alimentation | 9 to 30 Vdc |
| Type de pression | Manomètre |
| Type de raccordement au process | NPT Male |
| Valeur brute du poids | 0.35 |
| Valeur d'étalonnage du shunt | In vertical direction with fitting down, compound ranges are calibrated for positive pressure output only |
| Vibration | ± 20 g |
| Pays d'origine | China |
| Voir toutes les spécifications | |
PDF & Manuels
Accessoires
Convertisseur compact de courant ou tension analogique vers IO Link
C$245.46 / each
98 En stock
Afficher les évaluations et les avis
Rated 1 out of
5
by
Will L from
Untrustworthy calibrations
Faked calibration certificate (again). Claims to have been calibrated to 10,000psi using calibration equipment that will go to only 6,000psi
Date published: 2024-04-13
Rated 2 out of
5
by
H3rb3rt from
Word of Caution
The product performance was great, but there is a major design flaw. The cable connection option has the cable connected to the body by a nut that if loosened and taken off will break the unit. Whereas the PX409 series differential transducer instead does not have this problem, it has a sealed connection that doesn't allow you to break the unit so easily.
The reason I was attempting to take the nut off in the first place was because it was loose and the unit was dunked under water for cleaning so I was trying to make sure the unit would dry out fully before supplying power to the transducer.
Date published: 2021-04-16
Rated 4 out of
5
by
under pressure from
compact and reliable
Have purchased several of these transducers over the last 10 years and do not recall ever having to replace one due to failure. I usually get the 319 series and my only complaint is that there is no key on the connector to simplify pin alignment. They are also offered a wide range of pressure ratings.
Date published: 2019-04-04
Rated 5 out of
5
by
Dustin M from
Reliable Pressure Transducer
Calibrated well and works as it should! Will be buying again.
Date published: 2026-04-08
Rated 5 out of
5
by
Jacob M from
We keep coming back
Very durable and very accurate transducers. Best that we could find
Date published: 2026-04-04
Rated 1 out of
5
by
Eric M from
Slow, unresponsive ordering process
The entire process of buying to delivery was slow and poorly communicated. I had submitted an urgent order and it took way to long to receive order confirmation as well as unacceptably long for the product to ship. Please make drastic improvements to your order processing process and take actions like actively reviewing the current process for inefficiencies and ways to improve.
Date published: 2025-12-26
Rated 5 out of
5
by
NDPIII from
Solid product
Durable , stable readings in propeller dyno environment .
Date published: 2025-12-10
Rated 5 out of
5
by
Alex I from
No hassle
No hassle, I got the items I ordered. I had a tight timeline.
Date published: 2025-12-08