日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
PTC-13-A-Series
프로그래머블 듀얼 디지털 타이머, 범용 전원
在庫のあるモデル
- 듀얼 4자리 녹색 LCD 디스플레이 타이머
- 13개 프로그래밍 가능 타이밍 모드
- 99.99초부터 9999시간까지 9가지 시간 범위
- 1개 전환 접점 및 1개 N/O 릴레이 출력
製品の概要
- 정확도 ± 0.01%
- 접촉 평점 OP1 250 Vac/30 Vdc(저항성)에서 10 A; OP2 250 Vac/30 Vdc(저항성)에서 5 A
- 제어 출력 2 SPDT 릴레이
- 디스플레이 색상 그린
- 디스플레이 유형 듀얼 4자리 LCD
- 외함 등급 IP20, IP65
- 폼팩터 1/16 DIN
- 빈도 50~60 Hz
- 입력 유형 펄스
- 작동 온도, 최대 50 °C
- 최소 작동 온도 0 °C
- 출력 구성 오픈 컬렉터 출력, 최대 30Vdc, 100mA
- 출력 세부 정보 단극 전환 접점 및 단극 정상 개방(N/O) 접점
- 릴레이 등급 전기적 수명: 200,000 사이클; 기계적 수명: 5,000,000 사이클
- 시리즈 ID PTC-13-A-Series
- 저장 온도, 최대 70 °C
- 보관 온도 최소 -25 °C
- 공급 전력 참고 90-250 Vac (±10%), 부하: < 5VA
- 시간 범위 0.01~99.99초,; 0.1~999.9초, 1~9999초,; 00:01~99:59분, 0.1~999.9분,; 1~9999분, 00:01~99:59시간,; 0.1~999.9시간, 1~9999시간;
- 무게 230 g
Supported Applications
The Omega PTC-13-A Series comprises multifunction digital timers designed for controlling equipment, machinery, systems, or processes in industrial applications. These programmable dual digital timers feature a two-line, four-digit display and support timing functions ranging from 0.01 seconds to 9999 hours.
Operating Conditions & Performance
The series operates within an ambient temperature range of 0°C to +50°C (32°F to 122°F) with storage capabilities between -25°C and +70°C (-13°F to 158°F). Relative humidity must not exceed 80% for temperatures up to 31°C, decreasing linearly to 50% relative humidity at 40°C. Installation height is limited to a maximum of 2000m.
Timing accuracy is specified as ±0.01% ±1ms. The device meets EN61010-1:2010 safety requirements (pollution degree 2, overvoltage category II) and satisfies performance criterion B for EN 61326-1:2013 EMC directives regarding EN 61000-4-3. The enclosure provides an IP65 rating on the front and IP20 on the rear.
Configuration Options
The series is available in two primary power supply configurations:
- PTC-13-LV-A: 9-30Vdc/7-24Vac (±10%)
- PTC-13-A: 90-250Vac 50/60Hz (±10%)
The timers offer extensive configuration options including nine selectable time ranges and thirteen different timing modes. Input signal types can be set to PNP or NPN in programming mode, with adjustable minimum pulse and void duration times between 5ms and 100ms.
Outputs and Connections
- Relay Outputs: OUT1 provides a single pole changeover contact rated at 10A @ 250Vac (resistive load); OUT2 provides a single pole N/O contact rated at 5A @ 250Vac (resistive load).
- SSR Outputs: Two open collector outputs (SSR1 & SSR2) with maximum ratings of 30Vdc and 100mA.
- Auxiliary Power Supply: 12Vdc, maximum 50mA (un-regulated).
Data retention is handled via EEPROM with a minimum lifespan of 10 years. Electrical connections utilize plug-in terminals for signals and screw type terminals for power supply.
Mechanical Specifications
- Housing: Self-extinguishing plastic case suitable for flush-panel mounting according to DIN 43700.
- Dimensions: The series features a standard square size of approximately 48mm wide x 48mm high with depths ranging from 58.0mm to 87mm depending on the specific model documentation reference.
- Weight: Approximately 230g (without packaging).
Key Product Differences
The primary distinction between models in this series is the power supply voltage. The PTC-13-LV-A model supports low-voltage AC and DC inputs, while the PTC-13-A model operates on universal mains voltage (90-250Vac). Both variants share identical timing modes, accuracy specifications, output configurations, and environmental ratings.
Users must observe specific warnings: do not use this timer in locations where corrosive or flammable gases could be present. When cleaning the unit, solvents such as thinners, gasoline, or acid must not be used to avoid invalidating the product guarantee.