Need assistance? Call us: 1-800-663-4209
PX5500
High Accuracy Pressure Transducers with Long Term Stability
Models In Stock
- Integral Shunt Calibration
- Low Noise, 5 Vdc and 10 Vdc Output Models
- High 0.1% Accuracy
- Solid State Reliability
PX5500
From
$
549.53
Models In Stock
Product Overview
- Additional Features 1 None
- Burst Pressure 3x Full Scale
- Compensated Temperature, Max 82 °C
- Compensated Temperature, Min -18 °C
- Electrostatic Discharge Protected to 15 kV
- Materials, Wetted 17-4 Stainless Steel
- Mating Connector MIL-26482-I 10-6S
- Natural frequency 5 kHz for 1 bar (15 psi), increasing logarithmically to 50 kHz for 5000 psi
- Measurement Pressure, Min 0 psi
- Proof Pressure 2x Full Scale
- Sensing Element 4-active-arm Strain Gauge Bridge
- Sensing Element Note 4-active-arm bridge using sputter-deposited thin-film elements
- Series ID PX5500
Supported Applications
This thin-film pressure transducer series is suitable for testing, engineering laboratories, functional test systems, production testing, quality assurance, and hydraulic systems.
Operating Conditions & Performance
The sputtered strain gage design provides solid-state reliability, high shock and vibration resistance, and low drift.
Configuration Options
The series uses a millivolt-per-volt output and is offered in standard and metric units.
Key Product Differences
Pressure port, electrical connection, range, unit, output, and option configurations are available.
PDFs & Manuals
Accessories
accessories
Show Ratings & Reviews
Why does the excitation voltage say 16 to 38 VDC when the datasheet says 10 to 40 VDC?
The excitation voltage will vary depending on which output you select
Date published: 2021-08-24
Is the output signal single ended or double ended?
Hello, the new models will have a single ended voltage output, per wiring diagram on page 4 of the data sheet. The older models -5T had a two wire voltage out. In case you have more questions kindly email us at pressure@omega.com
Date published: 2023-03-24