検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

OPTIDEW

Michell Optidew チルドミラー湿度計

Michell Optidew Chilled Mirror Hygrometer
  • 새로운 냉각 거울 하이브리드 센서로 습도 변화에 빠른 동적 응답 제공
  • 이슬점 ±0.15°C, 온도 ±0.1°C 정확도
  • 이슬점 -40~+120°C의 넓은 측정 범위
  • 쉬운 네트워킹을 위한 이더넷 통신의 Modbus TCP를 포함한 다양한 통신 방식 선택 가능
OPTIDEW
販売元
Michell Optidew Chilled Mirror Hygrometer OPTIDEW OPTIDEW
loading all models
製品の概要
  • 정확도 ± 0.15 °C (± 0.27 °F)
  • 정확도 세부 사항 이슬점 측정 정확도: ±0.15°C (±0.27°F); 온도 측정 정확도: ±0.1°C (±0.18°F); 원격 압력 정확도: ±0.25% FS
  • 응용 분야 항공, 화학 정제소, 클린 룸, 엔진 테스트 스탠드, 환경 및 날씨, 환경 모니터링, 유량 측정, HVAC, 산업 및 제조업, 실험실, 제약, 온도 유지, 폐수 처리 응용
  • 본체 재질 알루미늄
  • 케이블 온도, 최대 90 °C
  • 최소 케이블 온도 -25 °C
  • 제어 출력 릴레이, 알람
  • 이슬점 온도 입력 범위 -25°C ~ 90°C
  • 치수 노트 Optidew 501(벽면 장착): 220 x 175 x 75mm. Optidew 401(데스크톱): 220 x 175 x 118mm. 제어 장치 1.5kg(3.3lb), 센서 200g(7.05oz). 케이스 재질: ABS.
  • 표시 단위 바, °C, °F, g/kg, G/M3, kPa, Pa, ppmV, psi, %RH
  • 디스플레이 크기 5.7인치
  • 디스플레이 유형 컬러 LCD 터치스크린
  • 전기 출력 4 ~ 20 mA
  • 인클로저 재질 ABS
  • 외함 등급 IP54
  • 길이 220 mm
  • 하중 저항 최대 부하 500Ω
  • 장착 방향 벤치탑
  • 전력 소비 최대 30 VA
  • 선택 가능한 압력 범위 0 ~ 160kPa, 0 ~ 2500kPa까지
  • 프로세스 연결 크기 1/8인치
  • 프로세스 연결 유형 NPT 수나사
  • 보호 능동 부품 절연 시스템
  • 반복성 ±0.05°C (±0.09°F)
  • 응답 시간 +10°C (+50°F)의 dp에서 1분 이내에 안정적인 측정
  • RTD 유형 Pt1000, 클래스 A
  • 감도 ±0.01°C (±0.018°F)
  • 센서 온도 의존성 제어 장치: 1.5 kg (3.3 lb), 센서: 200 g (7.05 oz)
  • 시리즈 ID OPTIDEW
  • 공급 전력 참고 100–240 VAC, 50–60 Hz, 30 VA 최대.
  • 공급 전압 100 ~ 240 Vac
  • 무게 1.5 kg
  • 무게 사양 참고 제어 장치: 1.5 kg (3.3 lb), 센서: 200 g (7.05 oz)
  • 폭 175 mm

Supported Applications

The Michell Optidew series comprises chilled mirror hygrometers designed for industrial humidity control and precision laboratory applications. The system combines the fast response of polymer relative humidity sensors with drift-free reliability, measuring dew point, temperature, and relative humidity.

  • Bench top configurations (Optidew 401) feature a display unit suitable for stationary monitoring.
  • Wall mount configurations (Optidew 501) are available as units with displays or transmitter-only versions.

Operating Conditions & Performance

The series provides dew point measurement ranges of -40 to +90°C (-40 to +194°F), -25 to +90°C (-13 to +194°F), and an extended range of -40 to +120°C (-40 to +248°F) depending on the selected sensor head. Accuracy is specified as ±0.15°C (±0.27°F) for dew point and ±0.1°C (±0.18°F) for temperature, with a repeatability of ±0.05°C (±0.09°F). The system achieves stable measurement at +10°C (+50°F) dp within 1 minute.

Operating ambient conditions are -20 to +50°C (-4 to +122°F), supporting up to 100% rh non-condensing, or 100% rh condensing with the IP65 connector version. The sensor head materials include POM (head) and Aluminum (body) for standard configurations, while harsh environment options utilize PEEK (head). Wetted parts are highly resistant to corrosion from acids and other gas contaminants.

Configuration Options

Sensor Heads & Ranges

  • POM Head, 1-Stage: -25 to 90°Cdp
  • POM Head, 2-Stage: -40 to 90°Cdp
  • Harsh Environment (PEEK) Head, 2-Stage: -40 to 120°Cdp

Housing & Mounting Options

The Optidew 501 series offers wall mount cases with display or transmitter-only configurations. Enclosure ratings include IP54 standard and optional IP65 (restricted to RS485 communications only for certain models). Dimensions are 220 x 175 x 118 mm (8.66" x 6.89" x 4.65") for bench top units and 220 x 175 x 75 mm (8.66" x 6.89" x 3") for wall mount cases.

Outputs & Communications

  • Analog: Two 0/4–20 mA outputs with a maximum load of 500Ω.
  • Digital Standard: Modbus RTU over RS485 and USB port.
  • Digital Optional: SD card slot, Modbus TCP over Ethernet (available on select models).

Calibration & Accessories

Factory calibration options include Standard Traceable DP Cal (4 points) or UKAS / ISO17025 certified calibrations for Dew Point (5 points) and Relative Humidity (5Ps @ one temperature). The series supports optional pressure transmitters (OPT2-PS16: 0 to 160kPa(A); OPT2-PS25: 0 to 2500kPa(G)) for accurate calculation of ppmᵥ & g/kg. Additional accessories include sensor sampling blocks, extended heatsinks, sintered aluminum guards with PTFE coating, and various cable lengths (0.3m to 20m) rated for standard or high-temperature applications.

Key Product Differences

The series is divided into two primary model families: the Optidew 401 Bench Top Hygrometer with display and the Optidew 501 Wall Mount Hygrometer. The Optidew 501 offers distinct case configurations including wall mount units with displays, IP65-rated versions restricted to RS485 communications only, and transmitter-only housings without local displays.

Communication capabilities vary by model selection; while USB and SD card interfaces are standard on many variants, the optional Ethernet interface is available for specific configurations. High-temperature sensor cables (OPT2-HTSC series) support measurements up to 120°C with probe leads rated to 250°C at the connector.

OPT401OPT501-ABCDABCABCABCDEFGHJABABCD
Base Model
Case
Sensor
Calibration
Cables for Dew Point and Temperature
Digital Communications (Optidew 401)
Digital Communications (Optidew 501)
Order codes: https://assets.dwyeromega.com/0/order-codes/791_Optidew401_501_97552_Order_Codes.pdf
ja-JP
en_SG
設定を保存する