Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here
VT-110
VT-110: B&K Vibro Compact Vibration Velocity Transmitter with 4-20mA Output
- Vibration Velocity Output 4-20mA loop powered
- Additional dynamic signal output - 100mV/g
- High quality with glass sealed M12 connector
- Compact size with superior “annular shear technology”
Product Overview
- Additional Features 1 100mV/g Additional dynamic signal output
- Applications Assembly Line, Casing Vibration, Compressor Control, Power Generation, Power Plants & Boilers, Pump Control, Shaft Vibrations
- Approvals CE
- Cable Length 5 m
- Capacitance 70 pF
- Electrical Output 4 to 20 mA
- Enclosure Ratings IP67
- Frequency Note 3 Hz to 1 kHz
- Ground Isolated Case
- Isolation 100 MΩ
- Loop Resistance, Max (Vdc power -10V)/20mA
- Mounting UNF Tapped Hole
- Operating Temperature, Max 120 °C
- Operating Temperature, Min -55 °C
- Operating Temperature Note Temperature operating_x000D_ • Loop current max. 10 mA -55…+120 °C (-65…+250 °F)_x000D_ • Loop current max. 20 mA -55 …+90 °C (-65…+212 °F)
- Output Detail Analog output_x000D_ • Analog output 4…20 mA, loop powered, proportional to vibration velocity mm/s rms_x000D_ • No vibration 4 mA ±5%_x000D_ • Full scale 20 mA ±5%
- Overload Capacity 2500 g peak
- Protection Overvoltage : Yes,Reverse polarity : Yes
- Sensitivity Range 100 mV/g ± 30 %
- Supply Voltage 10 to 30 Vdc
- Tolerance ± 30 %
- Vibration 250 g peak
The hermetic sealed 4-20mA loop powered industrial vibration velocity transmitter type VT-110 is designed to monitor the vibration in harsh industrial environment. It uses the industry standard 4-20mA Loop that interfaces directly with PLC DCS and 4-20mA monitor inputs. Measurement frequency from 3 to 1 000 Hz and measurement range of 20mm/s and 50 mm/s will fit in nearly all applications. Their compact size allows for installation in tight places. The dynamic signal out-put (acceleration) allows vibration analysis.
