Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here
UWRTD-NB9W
UW Series Wireless RTD Transmitter for Sanitary Applications
- Stainless Steel Construction with White Polypropylene Transmitter Housing
- Meets the requirements of 3-A Sanitary Standards
- Includes Probe and Wireless Radio Transmitter
- Free Software Converts Your PC Into a Multi-Channel Chart Recorder or Data Logger
Product Overview
- Accuracy ± 1 °C (± 1.8 °F)
- Accuracy Detail RTD: ±1°C from 0 to 400°C (32 to 752°F), ±2.5°C below 0°C or above 400°C (752°F)
- Data Interface Wireless, USB
- Data Interface Note USB (one interface cable included with receiver)
- Display Type N/A
- Electrical Connection Screw Terminal
- Enclosure Material N/A
- Form factor Head Mounted
- Height 3.74 in
- Input Type RTD
- Length 3.27 in
- Number of Channels 1
- Operating Temperature, Max 70 °C
- Operating Temperature, Min -10 °C
- Process Temperature, Max 600 °C
- Process Temperature, Min -200 °C
- Protection Head NB9 Nylon, Safety Chain, Standard
- Resolution RTD: 1°C
- Software Windows 2000, XP, Vista, Windows 7 operating system
- Supply Power Note One Standard 3.6 V lithium Battery, 7.2 Ah capacity (C)
- Supply Power Type Battery
- Weight 0.47 lb
- Width 3.86 in
- Wire Length 0 ft
The OMEGA RTD-to Wireless Connector/Converter System features stand-alone, compact,battery-powered RTD connectors that transmit their readings back to a host receiver up to 120 m(400') away. Units can be programmed in the field to accept 0.00385 or 0.00392 curve 3-wire,100 Ω, Pt RTDs, so they can wirelessly transmit the measured temperature, along with the connector ambient temperature, RF signal strength and battery condition to a remote host, such as the UWTC-REC Series. You can program the UWRTD to transmit your data at rates from once every two seconds to every 2 minutes.
The UWRTD is compatible with the UWTC-REC family of wireless receivers, which can accept signals from up to 48 wireless transmitters, and display them on a PC. Receivers are available with optional display and analog output. An analog output can be used to interface with a process controller, PLC or data acquisition device. Each unit includes free software that converts your PC into a monitor, chart recorder or data logger. Readings can be saved and later printed or exported to a spreadsheet file.Wireless Receivers
ZW-REC: 127-channel wireless receiver with Ethernet for web-based monitoring
UWTC-REC1: 48-channel wireless receiver with USB
UWTC-REC2: 48-channel wireless receiver with USB and single analog output
UWTC-REC4: 48-channel DIN rail mount wireless receiver with USB and four analog output signals
PDFs & Manuals
Software & Drivers
