1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
HX93-Srs-Temp-RH-Sig-Cond
Temperature/Relative Humidity Transmitter with Display and Probe
Models In Stock
- 4 to 20 mA, 0 to 1 Vdc, 0 to 5 Vdc or 0 to 10 Vdc Outputs for Both Temperature and Relative Humidity
- Rugged Industrial Splashproof Enclosure NEMA 13 (IP54)
- Accurate to ± 0.6°C (0 to 50°C) and ± 2.5% (10 to 90% Relative Humidity)
- New Models with Built-In Digital Display to Indicate Temperature and Relative Humidity
HX93-Srs-Temp-RH-Sig-Cond
From
€
581,60
Models In Stock
Product Overview
- Cable Diameter 8 mm
- Electrical Connection Liquid-tight nylon with neoprene gland, for 2.50 to 8.00 mm (0.09 to 0.315") diameter cable; internal 6 position terminal block accepts 14 to 22 gauge wire
- Enclosure Ratings IP54, NEMA Type 13
- Length 80.01 mm
- Materials, Wetted Polycarbonate
- Measurement Type Temperature, Humidity
- Relative Humidity Response Time 8 sec
- Repeatability ± 0.1% RH
- Response Time 5 to 30 sec
- Sampling Rate 0.25 Hz (4 seconds between updates)
- Supply Power Type DC
- Temperature Measurement, Max 75 °C
- Temperature Measurement, Min -30 °C
- Width 82.3 mm
- Wire Gauge 22 to 14 AWG
The HX93B and HX93BD Series transmitters provide remote and on-site monitoring of temperature and relative humidity. Both series output a linearized current or voltage signal proportional to the temperature and relative humidity. Relative humidity output is temperature compensated. Current output models enable placing of the transmitter at a remote location virtually any distance away from the measuring device. The HX93BD models feature a built-in digital display that indicates both temperature and relative humidity simultaneously. All models use an accurate digital sensor. A stainless steel mesh type filter, easily removable for cleaning, protects the sensor. Mounting screws are easily accessible inside the rugged, polycarbonate enclosure which protects the electronics to NEMA 13 (IP54) rating.
PDFs & Manuals
