Skip to search Skip to main content Skip to navigation

Netherlands 07077 03815 | International +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here

We noticed you are in , please visit your local site by clicking the below link for regional offers and support.

HX400-Srs-TRH-Sig-Cond

Item# HX400-Srs-TRH-Sig-Cond

In Stock

Lead Time (If not in stock): 0 week

Product Specs

<< See all Product Models
Brand
Accuracy ± 0.02 mA
Accuracy Detail Accuracy @ 23°C and Scaleable Measurement Range: Without field Calibration
Calibration Option Front 3 pushbutton with dual high bright 3-digit LED module
Current, Max Dual 4 to 20 mA
Data Interface N/A
Dew Point Temperature, Max 2 °C
Dew Point Temperature, Min -2 °C
Display Type Dual 3 Digit LED (Green)
Electrical Output 4 to 20 mA
Enclosure Ratings IP40, IP65, NEMA Type 4
Filter Stainless Steel wire mesh; 0.05 mm
Height 56 mm
Length 80 mm
Materials, Wetted Polycarbonate, POM
Measurement Pressure, Min 0 psi
Media Compatibility Clean dry air / inert gas, Fuel gases, HVAC / room air, Inert / non-reactive gases, Hydrogen, Nitrogen, Non-Corrosive Dry Gases, Oxygen
Operating Temperature, Max 100 °C
Operating Temperature, Min -40 °C
Probe Diameter 15.5 mm
Reading Rate 1 /sec
Relative Humidity 0 to 100% RH
Relative Humidity Accuracy ± 2% RH
Repeatability ± 1% RH
Resolution 0.1% RH
Response Time 10 sec
Series ID HX400-Srs-TRH-Sig-Cond
Supply Power Note Loop Power: 12 to 32 Vdc; dual 4 to 20 mA loop current; reverse polarity protected (Vloop = 24 Vdc, Tamb = 23 ± 2°C, Rload = 250 Ω)
Supply Power Type Loop Powered
Supply Voltage 12 to 32 Vdc
Temperature Measurement, Max 70 °C
Temperature Measurement, Min -20 °C
Weight 250 g
Wet Bulb Temperature, Max 80 °C
Wet Bulb Temperature, Min -20 °C
Width 110 mm
See All Specs Show Less
Temperature and Relative Humidity Signal Conditioner with LCD HX400-Srs-TRH-Sig-Cond HX400-Srs-TRH-Sig-Cond
en-NL
en_NL
Save Configuration