Netherlands 07077 03815 | International +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here
STR-Srs-Stepper-Drives
Added to Your Shopping Basket
Configuration complete.
Please add to basket to keep it or exit the configuration
Please add to basket to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Additional Features 2 | Dip Switch/Trim Pot |
| Control Characteristics | Mode Of Operation: Step and direction, Cw/Ccw Microstep Resolution: Switch selectable: 200, 200 smooth, 400, 400 smooth, 2000, 5000, 12800, 20000 steps/revolution Speed Range: Depends upon selected resolution amplifier is suitable for speeds up to 50 Rps Anti Resonance: Raises the system damping ratio eliminates midrange instability and allows stable operation to 50 Rps Waveform: Allows for fine adjustment of phase current waveform harmonic content to reduce low-speed torque ripple in the range 0.25 to 1.5 Rps Digital Noise Filter: Step pulse input: 150 Khz or 2 Mhz, jumper selectable Self TestSwitch Selectable: Rotates motor 2 revolutions in each direction Control Inputs: Step, direction, enable, optically isolated; 4 to 30 Vdc, 5 to 15 ma. Step Input: Min pulse width = 250 Ns; max pulse frequency = 2 Mhz Fault Output: Photodarlington, 80 Ma, 30 Vdc max; voltage drop = 1.2 Vdc max at 80 Ma |
| Control Interfaces & Operating Modes | Step and Direction Inputs: Min pulse width = 250 ns; max pulse frequency = 2 MHz |
| Control Mode | Step and Direction |
| Input Control Signal | 4 to 30 Vdc, 5 to 15 mA |
| Input Voltage | 4 to 30 Vdc |
| Motion Precision & Smoothness | Speed Range: Depends upon selected resolution amplifier is suitable for speeds up to 50 Rps |
| Number of Inputs | 3 |
| Number of Outputs | 1 |
| Operating Temperature, Max | 50 °C |
| Operating Temperature, Min | 0 °C |
| Process Connection | N/A |
| Relative Humidity | 90% non-condensing |
| See All Specs | |
