Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here
SGT-Full-Bridge-Shear
Shear, Full Bridge Strain Gauges with Transducer Quality
- Precision Transducer Quality Gages
- 350 or 700 ohm Bridges
- compensated for Steel or Aluminum
- 2 Half Bridge Pattern can be used a 1 Full Wheatstone Bridge
SGT-Full-Bridge-Shear
From
€
189,94
Product Overview
- Grid Style Full Bridge, Shear Pattern, 2 Half Bridge with Common Lead
- Operating Temperature, Max 95 °C
- Operating Temperature, Min -75 °C
- Pack Size 5
- Strain, Max 30,000 µm
OMEGADYNE® offers full bridge transducer quality strain gages for shear and torsional strain applications. These strain gages can be used in transducer design for shear beam load cells, or they can also be used for reaction torque on a shaft.
SGT-2DD/350-SY** has 2 half bridges on one carrier piece. Each half bridge has a dual shear pattern, with opposite grids and a common lead/solder pad. SGT-3/700-FB** has 4 independent shear strain gages, with opposite grid angles, on one carrier, with separate leads/pads (electrically independent). Below we show one wiring example SGT-2DD/350-SY** used to measure a reaction torque on a shaft. The strain gages have been numbered, and the leads/solder pads labeled.
SGT-2DD/350-SY** has 2 half bridges on one carrier piece. Each half bridge has a dual shear pattern, with opposite grids and a common lead/solder pad. SGT-3/700-FB** has 4 independent shear strain gages, with opposite grid angles, on one carrier, with separate leads/pads (electrically independent). Below we show one wiring example SGT-2DD/350-SY** used to measure a reaction torque on a shaft. The strain gages have been numbered, and the leads/solder pads labeled.
PDFs & Manuals
