DPPT-Series

PLATINUM™ Series Universal Input Digital Panel Meters

Models In Stock

Strain & Bridge Inputs, 6 Digit Display and Upgraded Platinum Software Now Available
Super High Performance (20 Samples / Sec), High Accuracy
Extremely Versatile yet Easy and Intuitive to Use
Bright 3-Color (RED, GREEN, and AMBER) 9 Segment LED Display with Wide Viewing Angle

See Product Overview

DPPT-Series

From ^€ 263,01

Models In Stock

Shop Models

More Variations Available

See all series options below

Data Sheet

Product Overview

A/D Conversion 24-bit sigma delta
Accuracy 0.03 % FS
Additional Features 1 Programmable 3 Color Display
Approvals UL, cUL, CE, UKCA
CMRR 120 dB
Configuration Differential
Cutout Dimensions 45 mm
Data Interface Note Ethernet Standards Compliance: IEEE 802.3 10/100 Base-T auto-switching, TCP/IP, ARP, HTTPGET Protocols: OMEGA ASCII, MODBUS® ASCII/RTU
Digital Filter Programmable
Display Range -1999 to 9999
External Fuse Required Time-Delay, UL 248-14 Listed: 100 mA/250 V; 400 mA/250 V (low voltage option) ;Time-Lag, IEC 127-3 Recognized: 100 mA/250 V; 400 mA/250 V (low voltage option)
Frequency 50 to 400 Hz
Height 48 mm
Impedance Input Process/Strain: 10M Ω for ±100 mV, 1M Ω for other voltage ranges ;Process Current: 5 Ω ;Thermocouple: 10K Ω max
Input Current 4 to 20 mA, 0 to 24 mA
Input Type Thermocouple, RTD, Thermistor, Current, Voltage, Strain
Input Voltage -100 to 100 mV, -1 to 1 V, -10 to 10 Vdc
Isolation Power to Input/Output: 2300 Vac per 1 min test; 1500 Vac per 1 min test (low voltage/power option) Power to Relays/SSR Outputs: 2300 Vac per 1 min test Relays/SSR to Relay/SSR Outputs: 2300 Vac per 1 min test RS232/RS485 to Inputs/Outputs: 500 Vac per 1 min test
Length 127 mm
Measuring Range Process Voltage: ±50 mV, ±100 mV, ±1, ±10 Vdc;Process Current: Scalable within 0 to 24 mA;Thermocouple;Type J: -210 to 1200 °C ;Type K: -270 to 160 °C and -160 to 1372 °C;Type T: -270 to -190 °C and -190 to 400 °C;Type E: -270 to -220 °C and -220 to 1000 °C;Type R: -50 to 40 °C and 40 to 1788 °C;Type S: -50 to 100 °C and 100 to 1768 °C;Type B: 100 to 640 °C and 640 to 1820 °C;Type C: 0 to 2320 °C;Type N: -250 to -100 °C and -100 to 1300 °C;RTD;Pt, 0.00385, 100 Ω, 500 Ω, 1000 Ω: -200 to 850 °C;Pt, 0.003916, 100 Ω: -200 to 660 °C;Pt, 0.00392, 100 Ω : -200 to 660 °C;Thermistor;2252 Ω: -40 to 120 °C;5K Ω: -30 to 140 °C;10K Ω: -20 to 150 °C
Number of Inputs 1
Operating Temperature, Max 50 °C
Operating Temperature, Min 0 °C
Operating Temperature Note 0 to 50°C (32 to 122°F), 90% RH non-condensing
Polarity Bipolar
Power Consumption 4 W
Reading Rate 20/sec
Relative Humidity 0.9
Resolution 0.1° temperature; 10 µV process
RTD Input Range 100/500/1000 Ω Pt sensor, 2-, 3- or 4-wire; 0.00385, 0.00392 (100 Ω only), or 0.003916 (100 Ω only) curves
Sampling Rate 20 Hz (20 updates/second)
Sensor/Transmitter Power 5, 10, 12 and 24 Vdc @ 25 mA
Sensor/Transmitter Power Note Firmware selectable (no jumpers to set) to 5, 10, 12, and 24 Vdc @ 25 mA
Strain Input ± 50 mV, ± 100 mV
Supply Power Note 90 to 240 Vac ±10%, 50 to 400 Hz*, 110 to 375 Vdc, equivalent voltage
Temperature Stability RTD: 0.04°C/°C ;TC@ 25°C (77°F): 0.05°C/°C ;Cold Junction Compensation Process: 50 ppm/°C
Thermistor Input Range 2252 Ω, 5K Ω, 10K Ω
Thermocouple Type J, K, T, E, R, S, B, C, N
Warm Up Time 30 mins
Width 48 mm

The Industry Leading PLATINUM Series family of microprocessor-based digital panel meters offer unparalleled flexibility in process measurement. While extremely powerful and versatile, great care has gone into designing a product that is very easy to set-up and use. The automatic hardware configuration recognition eliminates the need for jumpers and allows the firmware to automatically simplify itself, eliminating all menu options that do not apply to a specific configuration.

Each unit allows the user to select the input type from 9 thermocouple types (J, K, T, E, R, S, B, C, and N), Pt RTDs (100, 500, or 1000 Ω, with either 385, 392, or 3916 curve), thermistors (2250 Ω, 5K Ω, and 10K Ω), DC voltage, or DC current, and Strain & Bridge Inputs. The bipolar voltage or current inputs are fully scalable to virtually all engineering units, with a selectable decimal point that is perfect for use with pressure, flow, or other process input.

Two alarms can be configured for above, below, hi/lo, and band triggering using either absolute or deviation alarm trigger points. In addition, high-high/low-low indication is available. The two optional single pole double throw mechanical relays can be assigned to either or both alarm triggers. Two annunciators and three display colors can also be assigned to the alarm triggers.

The PLATINUMΩ Series device features a large, 3-color, 9 segment programmable LED display with the capability to change color and/or change the state of designated outputs every time an alarm is triggered. Now 6 digit display is available. The universal power supply accepts 90 to 240 Vac. The low voltage power option accepts 24 Vac or 12 to 36 Vdc.

Embedded Ethernet and Serial Communications
Optional embedded ethernet on the 1Ω16 and 1Ω8 DIN models allow the units to connect directly to an ethernet network and transmit data in standard TCP/IP packets, or serve web pages over a LAN or the internet. Optional serial communications are also available configurable as RS232 or RS485, with straightforward ASCII commands or MODBUS®. All three types of communications interfaces (USB, ethernet, and serial) can be installed and active simultaneously.

*If you have the previous firmware version 1.3.0.25 installed, please upgrade it to the latest.

Learn More

Read about the DPPT Series in different applications: