Netherlands 07077 03815 | International +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here
OMPBD7P-MT64PX01
Non-illuminated Heavy Duty/Oil Tight Push Buttons and Push Button Enclosures
Added to Your Shopping Basket
Configuration complete.
Please add to basket to keep it or exit the configuration
Please add to basket to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
|
| Accessory Type | Mushroom |
| Additional Features 1 | Complete With Latch and One Contact Block |
| Color Options | Red |
| Contact Blocks | 1 NC Contact |
| Enclosure Ratings | IP65, IP66, UL Type 12, UL Type 13, UL Type 3, UL Type 3R, UL Type 4, UL Type 4X |
| GrossWeightValue | 0.15 |
| Insulation Voltage | Ui = 690 V (screw terminal) ;Ui = 300 V (screwless terminal) |
| Mechanical Life | 300,000 Cycles |
| Mounting Torque (Front-of-Panel) | 1.7 Nm |
| Operating Forces (Back-of-Panel) | 3.4 N |
| Operating Forces (Front-of-Panel) | N/A |
| Operating Temperature, Max | 70 °C |
| Operating Temperature, Min | -25 °C |
| Pushbutton Material | Plastic |
| Pushbutton Size | 60 mm |
| Relative Humidity | 50 to 95% RH |
| Relative Humidity Note | 50...95% RH from 25 to 60°C (77 to 140°F) per: Procedure IV of MIL-STD-810C, Method 507.1 cycling test |
| Series ID | OMPBD7 |
| Source of Light | N/A |
| Storage Temperature, Max | 85 °C |
| Storage Temperature, Min | -40 °C |
| Supply Voltage | N/A |
| Switch Operation | Maintained |
| Switch Type | Non-Illuminated |
| Tightening Torque | 0.7 to 0.9 Nm (6 to 8 lb-in) |
| Vibration and Shock | Vibration (Front Panel): Tested at 10 ...2000 Hz, 1.52 mm displacement (peak-to-peak);max/10 G max for 3 hr duration, no damage;Vibration (Back of Panel): 10 to 2000 Hz, 1.52 mm displacement (peak-to-peak) max/10 G max 6 hr;Shock (Back of Panel): Tested at 1/2 cycle sine wave for 11 ms and no damage at 100 G max;Shock (Front of Panel): Tested at 1/2 cycle sine wave for 11 ms; no damage at 100 G |
| Wire Gauge | 18 to 12 AWG |
| Country of Origin | China |
| See All Specs | |
PDFs & Manuals