Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here
PRS-3-100-M12
M12 Connector RTD Probes with Class A Accuracy 3-A Sanitary
- Pt100 Class A Sensor with M12, 4-Pin Connection Allows for Quick and Easy Installation. An M12 Extension Cable is Required for Installation.
- 3-A Approved Design, Flanges conform to ASME-BPE-2007
- Can Be Used In Sanitary, Hygienic, and Clean-In-Place Food, Dairy, Beverage and BioPharmaceutical Applications
- Wetted Surfaces are 316L Stainless Steel With a Surface Finish = 32 Microinches or Better
PRS-3-100-M12
From
€
235,80
Product Overview
- Accuracy Class A
- Electrical Connection M12 4 pin Female
- Insulation PVC
- Nominal Resistance 100 Ω
- Number of Wires 4
- Process Connection Type Tri-Clamp
- Process Temperature, Max 200 °C
- Process Temperature, Min -50 °C
- Sheath Material 316L Stainless Steel
- Temperature Sensor Type RTD
Note: These Sensors Require an M12 Extension Cable to Connect the Sensor To Your Instrumentation.
The OMEGA PRS-S-M12 and PRS-H-M12 Series RTD Sensors meets the requirements of the 3-A Sanitary Standards for food, beverage, dairy, and pharmaceutical applications These temperature sensors are manufactured with 316L stainless steel housings that meet the dimensional and finish requirements of 3-A Standard 74-05 and ASME BPE-2007, and are welded and processed to provide a clean, smooth, 32 microinch or better surface finish in the wetted areas for Clean-in-Place processes. The probe stems are manufactured in two configurations; with a standard ¼' diameter probe for standard duty service, and a stepped 3/8' to 3/16' diameter probe design for good response times in heavy duty applications.
The OMEGA PRS-S-M12 and PRS-H-M12 Series RTD Sensors meets the requirements of the 3-A Sanitary Standards for food, beverage, dairy, and pharmaceutical applications These temperature sensors are manufactured with 316L stainless steel housings that meet the dimensional and finish requirements of 3-A Standard 74-05 and ASME BPE-2007, and are welded and processed to provide a clean, smooth, 32 microinch or better surface finish in the wetted areas for Clean-in-Place processes. The probe stems are manufactured in two configurations; with a standard ¼' diameter probe for standard duty service, and a stepped 3/8' to 3/16' diameter probe design for good response times in heavy duty applications.
PDFs & Manuals
