Netherlands 07077 03815 | International +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here
CNIS3252-DC
1/32 DIN Models iS32 Strain and Process Meters and Controllers
Choose a Variant
Cutout Dimensions
Control Output
Retransmission/Analog Output
Analog Output 0 to 10 Vdc Solid State Relay/0.5 A at 120/240 Vac continuous
Solid State Relay/0.5 A at 120/240 Vac continuous Pulsed Driver 10 Vdc at 20 mA /for use with external SSR
Analog Output 0 to 10 Vdc Relay SPDT 3A at 120/3 A at 240 Vac
Analog Output 0 to 10 Vdc Pulsed Driver 10 Vdc at 20 mA /for use with external SSR
Control Action
Data Interface
Added to Your Shopping Basket
Configuration complete.
Please add to basket to keep it or exit the configuration
Please add to basket to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 0.03 % |
| Analog-to-Digital Technique | Dual slope |
| Approvals | UL, C-UL, UKCA, CE per EN61010- 1:2001, F |
| CMRR | 120 dB |
| Control Action | Action: Reverse (heat) or direct (cool) |
| Control Output | SSR Relay |
| Cutout Dimensions | 0.886 x 1.772 in |
| Data Interface | N/A |
| Decimal Selection | 0,001, 0,01, 0,1, None |
| Digital Filter | Programmable |
| Display Note | 4-digit 9-segment LED 10.2 mm (0.40"); i32, i16, i16D, i8DV 21 mm (0.83"); i8 10.2 mm (0.40") and 21 mm (0.83"); i8DH RED, GREEN, and AMBER programmable colors for process variable, setpoint and temperature units |
| Display Type | LED |
| Electrical Connection | Screw Terminal |
| Enclosure Ratings | IP65, NEMA Type 4, NEMA Type 4X |
| Form factor | 1/32 DIN |
| GrossWeightValue | 0.15 |
| Height | 1 in |
| Impedance Input | 10 MΩ for 100 mV;1 MΩ for 1V or 10 Vdc |
| Input Range Note | 0 to 100 mVdc,-100 mVdc to 1 Vdc, 0 to 10 Vdc, 0 to 20 mA |
| Input Type | Single Ended, Voltage, Current, Strain, Temperature |
| Isolation | Power to Input/Output: 2300 Vac per 1 minute test For Low Voltage Power Option: 1500 Vac per 1 minute test Power to Relay/SSR Output: 2300 Vac per 1 minute test Relay/SSR to Relay/SSR Output: 2300 Vac per 1 minute test RS232/485 to Input/Output: 500 Vac per 1 minute test |
| Length | 5 in |
| Linearization Points | Up to 10 |
| Measurement Type | Current, Strain, Temperature, Voltage |
| Mounting | Panel |
| NMRR | 60 dB |
| Number of Digits | 4 |
| Number of Inputs | 5 |
| Number of Relays | 1 |
| Offset Adjustment | -1999 to 9999 |
| Operating Temperature, Max | 55 °C |
| Operating Temperature, Min | 0 °C |
| Output Detail | Analog Output (Output 1 Only): Non-isolated, proportional 0 to 10 Vdc or 0 to 20 mA; 500 Ω max, SSR: 20 to 265 Vac @ 0.05 to 0.5 A (resistive load); continuous |
| Output Signal | Current, Voltage |
| Polarity | Unipolar |
| RTD Type | 100/500/1000 Ω Pt |
| Reading Rate | 3/sec |
| Relative Humidity | 90% RH non-condensing |
| Resolution | 10/1µV |
| Retransmission/Analog Output | Analog Output 0 to 10 Vdc Solid State Relay/0.5 A at 120/240 Vac continuous |
| Sampling Rate | 3 Hz (3 updates/second) |
| Sensor Excitation | 24 Vdc @ 25 mA (not available for low-power option) |
| Series ID | i-Series-Strain |
| Set Point Adjustment | Menu Configurable |
| Step Response | 0.7 s for 99.9% |
| Supply Power Note | Low Voltage Power Option: 24 Vac**, 12 to 36 Vdc for DPi/CNi/DPiS/CNiS; 20 to 36 Vdc for dual display, ethernet and isolated analog output from qualified safety approved source |
| Supply Power Type | DC |
| Supply Voltage | 12 to 36 Vdc, 24 Vac |
| Temperature Stability | 50 ppm/°C |
| Thermocouple Type | J, K, T, E, R, S, B, C, N, L |
| Weight | 127 g |
| Width | 1.89 in |
| Country of Origin | Mexico |
| See All Specs | |
PDFs & Manuals
