TX400-Srs-RFID-Prog-Tx

Head Mount Temperature Transmitters with RFID Communications

See Product Overview

From ^€ 66,03

Shop Models

2 Variations available

See all series options below

Data Sheet

Product Overview

Approvals CE,EN 61000-6-4, EN 61000-6-2
Calibration Wireless with RFID technology (NFC)
Diameter 45 mm
Electrical Connection Screw Terminal
Electrical Output 4 to 20 mA
Enclosure Ratings IP20, NEMA Type 1
Height 23 mm
Housing Material Nylon (PA66)
Humidity Range 30 to 90% RH non condensing
Lead Resistance, Max 20 Ω
Mounting DIN/B Head
Noise Rejection 50 to 60 Hz
Operating Temperature, Max 85 °C
Operating Temperature, Min -40 °C
Probe Length 0 mm
Programmable Functions offset, Range, Sampling Frequency, Sensor Burnout Indication, sensor type
Protection Current 30 mA
Resolution 1 μA
Response Time 600 ms
Sampling Time 300 ms
Sensor Type Transmitter
Setup Controls Wireless with RFID technology (NFC)
Sheath Material N/A
Software Windows® XP/7/8 (32-bit and 64-bit), Windows 10 (64-bit)
Storage Temperature, Max 85 °C
Storage Temperature, Min -40 °C
Supply Power Note 2-wire loop powered; operating range 6 to 32 Vdc
Supply Power Type DC
Supply Voltage 6 to 32 Vdc
Temperature Input Range Pt100: -200 to 800 °C; Pt1000: -200 to 800 °C; Ni100: -50 to 170 °C
Transmission Error, Max 0.1% or 0.2°C
Weight 30 g

The TX401 and TX402 head mount temperature transmitters transform a temperature signal acquired from a Pt100, Pt1000 (TX401 only) or Ni100 RTD sensor or from a thermocouple (TX402 only) into a linearized 2-wire loop-powered 4 to 20 mA output. The characteristics of these converters ensure high precision on the reading scale with 16-bit conversion. The 4 to 20 mA output can be scaled based on the desired temperature input range. The programming procedure uses an RFID (NFC) mode with the dedicated TX400-RFID programmer that allows the user to make all calibrations and settings quickly and without the need to power and connect up the transmitter. Simply connect the TX400-RFID programmer to the USB port of your PC, start the RF Programmer configuration software and place the transmitter on top of the TX400-RFID programmer to establish communications.
An additional programming tool is the Omega Brand Google App - "Direct Link" relying on RFID/NFC connectivity and allowing straightforward programming without wirings by Android devices.
These temperature transmitters are also provided with a data logging function for the input signal. Transmitters have a non-volatile memory (circular buffer) for data-logging with user-selectable sampling time. The user selects the sampling time (1 to 3600 seconds) and then each time the 4 to 20 mA loop powers the device, the input value is stored to nonvolatile memory.
Using the TX400-RFID programmer along with the RF Programmer configuration software (software is a free download from OMEGA) the user can:
    • Completely configure the transmitter including scaling the 4 to 20 mA output to desired temperature input range
    • Implement field calibration to compensate for gain and offset errors
    • Download logged data to PC for visualization and printing

PDFs & Manuals

TX400-Series_spec User Guide - TX400-Srs-RFID-Prog-Tx Series View More

View Less

Software & Drivers

TX400-Series_software View More

View Less

Compliance