Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here
OB-BOND-CHEM-SET
Chemical Set High Temperature Cements
Models In Stock
- Thermally Conductive
- Thermal Shock Resistant
- Electrical Insulator
- Resists Oils, Solvents, Most Acids
OB-BOND-CHEM-SET
From
€
29,41
Models In Stock
Product Overview
Chemical Set Cements set or cure by an internal chemical action which does not require exposure to air. Chemical Set Cements can be used in thick applications (applied in thicknesses greater than 1/4")*.
SELECTION CRITERIA FOR CEMENTS
1. Type of Application † “Potting, sealing, encapsulating, assembling, bonding. Is a thick or thin film of cement required? This dictates whether or not an air set or a chemical set cement can be used.
2. Thermal Considerations † “What is the maximum temperature that the cement must withstand? What degree of thermal conductivity is needed? What degree of thermal expansion is allowed? These properties are then matched to the appropriate cement.
3. Solvent † “ 10% Sodium Hydroxide. However its difficult to remove cured cement.
4. Substrate † “ What materials will the cement be in contact with?
SELECTION CRITERIA FOR CEMENTS
1. Type of Application † “Potting, sealing, encapsulating, assembling, bonding. Is a thick or thin film of cement required? This dictates whether or not an air set or a chemical set cement can be used.
2. Thermal Considerations † “What is the maximum temperature that the cement must withstand? What degree of thermal conductivity is needed? What degree of thermal expansion is allowed? These properties are then matched to the appropriate cement.
3. Solvent † “ 10% Sodium Hydroxide. However its difficult to remove cured cement.
4. Substrate † “ What materials will the cement be in contact with?
PDFs & Manuals
