Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here
CN710-Series
1/8 DIN Vertical Temperature Controllers with Autotune and RS485
This product series currently has an extended lead time. For a potential replacement, please see the CN4000-Series or CNPT-Series
- Dual Display
- Autotune
- RS-485 Communications
- Free Software
CN710-Series
From
€
191,79
Product Overview
- Accuracy ± 0.25 %
- Accuracy Detail ± 0.25% span, ± 1 least significant digit
- Cutout Dimensions 92 x 46 mm
- Data Interface RS485 Modbus
- Depth Behind Panel 79.2 mm
- Display Size 9.53 mm (.37 in)
- Display Type 4 Digit LED
- Display Type Note Two 4-digit, 7-segment LED Display
- Enclosure Ratings IP66
- Form factor 1/8 DIN Vertical
- Input Type Thermocouple, RTD, Thermistor
- Measurement Type Temperature
- Measuring Range Pt100Ω RTD: 0 to 100°C, -20 to 500°C, -200 to 600°C Type B: 100 to 1800°C Type S: 0 to 1700°C Type R: 0 to 1700°C Type N: -200 to 1300°C Type E: 0 to 600°C Type T: -20 to 400°C, -200 to 400°C Type J: -20 to 400°C, -100 to 850°C Type K: -200 to 1300°C, -200 to 500°C Type L: -200 to 500°C Type U: -200 to 800°C
- Memory Backup Non-Volatile
- Number of Inputs 1
- Operating Temperature, Max 50 °C
- Operating Temperature, Min 0 °C
- Panel Thickness, Max 9.5 mm
- Supply Power Note 50/60 Hz
- Supply Power Type AC
- Weight 425 g
The CN710 Series temperature controllers offer easy-to-use programming menus designed for quick installation. These units are designed for direct or reverse acting (cooling or heating) control. The CN710 Series can be programmed for simple ON/OFF or more complex PID control functions. PID control is supported with manual or auto-tuning. Select relay, DC pulse, or current output control methods. The controller also includes two additional alarm outputs. The alarm outputs can be configured from 12 different pre-programmed settings. The temperature controller accepts a variety of thermocouple and RTD inputs. The process value and setpoint value are displayed simultaneously on the large dual LED. Auto-tuning, engineering units (°F or °C) and alarm status is also indicated on the face-plate.
PDFs & Manuals
Software & Drivers
