Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here
DP41-Series
1/8 DIN High Performance Temperature, Process and Strain Meter
- Extended 5-Year Warranty at No Extra Charge
- 6-Digit Display
- Min/Max Storage
- 4 Isolated Open Collector Outputs
DP41-Series
From
€
1.036,26
Product Overview
- A/D Conversion Dual-slope technique
- Accuracy ± 0.005 %
- Common Mode Rejection 120 dB
- Common Mode Voltage 1500 Vp per HV test
- Current Measurement Range 0 to 20 mA, 4 to 20 mA
- Cutout Dimensions 45 x 92 mm
- Display Color Red, Green
- Display Size 13.7 mm (0.54 in)
- Display Type 6 Digit Single LED
- Display Type Note Red or green 6-digit, 14-segment, 13.7 mm (0.54") high; 4 alarm indicators
- Enclosure Ratings IP65, NEMA Type 4
- Form factor 1/8 DIN
- Height 48 mm
- Input Configuration Single-ended
- Length 165 mm
- Normal Mode Rejection 60 dB
- Number of Inputs 1
- Offset Adjustment 0 to 999,999 or 0 to -99,999, programmable
- Operating Temperature, Max 50 °C
- Operating Temperature, Min 0 °C
- Polarity Unipolar/Bipolar, programmable
- Power Consumption 10 W
- Power Consumption Note 6 W nom., 10 W max
- Reading Rate 3/s or 13/s, 60 Hz; 3/s or 12/s, 50 Hz
- Relative Humidity 95% RH, non-condensing
- Resolution 15-bit
- Sampling Rate 13 Hz (13 updates/second)
- Sensor Break Protection Up-scale or down-scale, programmable
- Sensor/Transmitter Power 10 V at 30 mA; 24V at 25 mA
- Setpoint 4 isolated open collector; rated 150 mA at 1V sink, 30V open
- Span Adjustment 0.00001 to 500,000 counts, programmable
- Step Response 1 sec to 99.9%
- Storage Temperature, Max 85 °C
- Storage Temperature, Min -40 °C
- Supply Power Note 115 or 230 Vac, 49 to 400 Hz; 10 to 32 Vdc
- Supply Power Type AC
- Thermal Span Effect ±20 ppm
- Warm-Up to Rated Accuracy 50 min
- Weight 574 g
- Width 96 mm
The OMEGA™ DP41 Series of digital panel meter/controllers has set the world standard for accuracy and quality in industrial instrumentation. These meters can measure a broad spectrum of DC voltage and current ranges such as 0-100 mV, 0 to 5 Vdc, 0 to 10 Vdc, 4 to 20 mA, 0 to 20 mA and more as well as inputs from 9 thermocouple types and from most RTDs, pressure transducers, load cells, strain gauges, and potentiometers. Models include the DP41-U, which covers all the input types.
Standard features include 6-digit display; 5 front-panel pushbutton keys; 4 open-collector outputs; and alarm/control, and analog outputs. Configurable analog output ranges are 0 to 20 mA, 4 to 20 mA, 0 to 5 Vdc, and 0 to 10 Vdc.
On-board excitation allows these meters to power virtually any sensor or transmitter, and 4 set points give the user numerous control/alarm possibilities. Setpoint configurations include active above or below; latching or non-latching; and high deviation, low deviation, or band deviation.
With the RS232/485 serial communications option, the user can set the display parameters and read the current, max, and min values remotely. The DP40-R4 board option provides four relays, activated by the selected setpoint.
Standard features include 6-digit display; 5 front-panel pushbutton keys; 4 open-collector outputs; and alarm/control, and analog outputs. Configurable analog output ranges are 0 to 20 mA, 4 to 20 mA, 0 to 5 Vdc, and 0 to 10 Vdc.
On-board excitation allows these meters to power virtually any sensor or transmitter, and 4 set points give the user numerous control/alarm possibilities. Setpoint configurations include active above or below; latching or non-latching; and high deviation, low deviation, or band deviation.
With the RS232/485 serial communications option, the user can set the display parameters and read the current, max, and min values remotely. The DP40-R4 board option provides four relays, activated by the selected setpoint.
