CN400-Series

1/16 DIN Single/Dual Inputs PID Controller Programmable by NFC/RFID

1/16 DIN Dual Display
Single/Dual Universal Inputs
Fast Speed up to 470 Samples/Sec
Programmable by NFC/RFID

See Product Overview

CN400-Series

From ^€ 236,20

Shop Models

5 Variations available

See all series options below

Data Sheet

Product Overview

Accuracy ± 15 %
Alarm modes Absolute or Threshold, Adjustable, Band, High, High/Low, Loop Break Alarm, Low, Manual reset
APP NFC Programming via APP Direct Link for Android smartphones
Auto/Manual function Output percentage command also with automatic change in case of sensor failure
Control Algorithms On/Off Control, PID Control
Current Transformer Input Selection One C.T. 50 mA, 800 μs - 4096 points
Data protection Access by password, Alarm setpoint, Lock of control
Display Type 4 Digit LED
Display Type Note 4 digits 0.5” white + 4 digits 0.3” red
Double P.I.D Heating / Cooling P.I.D
Enclosure Material Polycarbonate
Enclosure Ratings IP20, IP65
Form factor 1/16 DIN
Galvanic Isolation 2.5 KV
Height 48 mm
Length 105 mm
Measurement Type Current, Resistance, Temperature, Voltage
Open/Close logic Open / Close logic for motorized valves
Operating Temperature, Max 45 °C
Operating Temperature, Min 0 °C
Programmable Functions Pre-programmed cycle
Quick Set-up Options Memory Card, software LABSOFTVIEW, or EASY-UP
Relative Humidity 35 to 95 RH%
Sampling Rate 470 Hz (470 updates/second)
Sampling Rate Note Programmable up to 2.1 ms (frequency up to 470 Hz)
Soft-Start Rising gradient expressed as Degrees / Hour or fixed output percentage
Supply Power Note 50/60 Hz
Tuning Autotune, Manual
Weight 185 g
Width 48 mm

The CN400 Single/Dual Inputs PID Controller Series stand out for the bright display which ensures optimal visibility and increased level of information for the operator. The CN400 Series introduces the latest NFC/RFID programming technology with a dedicated App - Omega Direct Link for all Android devices (Free Download from Google Play). No more wiring, cables, or power supply, just quick set-up/updates on site with your phone. With dual analog input and dual analog outputs model option, the CN400 Series can achieve two separate heating/cooling PID control loops in one device or to handle mathematical operations between two process values. The outputs can be selected as command/multiple alarm modes/analog retransmission. Serial communication standard is RS485 with Modbus RTU/Slave protocol. The CN400 Series power supply has an extended range of 24 to 230VAC / VDC with galvanic insulation of the net for the single loop version, while the model with double analog input provides two versions: 115 / 230 VAC or 24 VAC / VDC.