Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here
CN401-11445-C4
1/16 DIN PID Controller, 2 Relays, 2 SSR, DI/O, RS-485
Choose a Variant
Data Interface
Control Output
Supply Voltage
Output Signal
Added to Your Shopping Basket
Configuration complete.
Please add to basket to keep it or exit the configuration
Please add to basket to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| APP | NFC Programming via APP Direct Link for Android smartphones |
| Accuracy | ± 15 % |
| Additional Features 1 | NFC, 2 D.I. |
| Alarm modes | Absolute or Threshold, Adjustable, Band, High, High/Low, Loop Break Alarm, Low, Manual reset |
| Auto/Manual function | Output percentage command also with automatic change in case of sensor failure |
| Control Algorithms | On/Off Control, PID Control |
| Control Output | 2 SSR Relay, SPDT Relay, SPST Relay, Analogue Output |
| Current Transformer Input | Selection One C.T. 50 mA, 800 μs - 4096 points |
| Data Interface | RS485 Modbus |
| Data protection | Access by password, Alarm setpoint, Lock of control |
| Display Type | 4 Digit LED |
| Display Type Note | 4 digits 0.5” white + 4 digits 0.3” red |
| Double P.I.D | Heating / Cooling P.I.D |
| Enclosure Material | Polycarbonate |
| Enclosure Ratings | IP20, IP65 |
| Form factor | 1/16 DIN |
| Galvanic Isolation | 2.5 KV |
| Height | 48 mm |
| Input Type | Thermocouple, RTD, Thermistor, mA, mV, Digital I/O |
| Length | 105 mm |
| Measurement Type | Current, Resistance, Temperature, Voltage |
| Number of Control Outputs | 5 |
| Number of Inputs | 1 |
| Open/Close logic | Open / Close logic for motorized valves |
| Operating Temperature, Max | 45 °C |
| Operating Temperature, Min | 0 °C |
| Output Detail | 2 Relays, 2 SSRs, 1 Analog;2/3 Relays Outputs : Relay 2 A - 250 V AC resistive change 2 SSR Outputs : 12 / 24 V DC - 30 mA max 1/2 Analog : Selection 4 to 20 mA (40000 points ± 0,2% F.S.) or 0 to 10 VDC (40000 points ± 0,2% F.S.) for command or retransmission PV / SPV |
| Output Signal | Current, Voltage |
| Programmable Functions | Pre-programmed cycle |
| Quick Set-up Options | Memory Card, software LABSOFTVIEW, or EASY-UP |
| Relative Humidity | 35 to 95 RH% |
| Sampling Rate | 470 Hz (470 updates/second) |
| Sampling Rate Note | Programmable up to 2.1 ms (frequency up to 470 Hz) |
| Soft-Start | Rising gradient expressed as Degrees / Hour or fixed output percentage |
| Supply Power Note | 50/60 Hz |
| Supply Power Type | AC/DC |
| Supply Voltage | 24 to 230 Vac/Vdc |
| Tuning | Autotune, Manual |
| Weight | 185 g |
| Width | 48 mm |
| Country of Origin | Italy |
| See All Specs | |
PDFs & Manuals
Software & Drivers
