India +91 8925807296 | Welcome to our new website, found an issue or bug? Please report it here
SCH-Series
Stainless Steel Cartridge Heater 0.13-1.25 in OD 1-36 in Long
This part is temporarily unavailable. Please see the CSS-CSH as a suggested replacement.
- 304 Stainless steel sheath for excellent thermal conductivity
- Sheath temperatures up to 677°C (1250°F)
- Diameters between 1/8 in to 1 1/4 in
- Lengths from 1 in to 36 in (2.5 to 91 cm)
SCH-Series
From
$
63.07
Product Overview
- Electrical Connection Stripped Leads
- Lead Material Fiberglass
- Series ID SCH-Series
- Sheath Material 304 Stainless Steel
- Sheath Temperature, Max 677 °C
Supported Applications
The Omega SCH series consists of stainless steel cartridge heaters designed to provide maximum wattage in limited spaces. The product overview identifies specific applications for this heater, including packaging, rubber molding, form fill and sealing, platen heating, HVAC compressors, die casting, hot melt adhesives, food manufacturing, and extrusion.
Operating Conditions & Performance
The SCH series features a 304 Stainless Steel sheath selected for uniform heat distribution and good thermal conductivity. The documented maximum sheath temperature is 677°C (1250°F). Operating voltage options are listed as 120VAC or 240 VAC.
Performance ranges across the series include:
- Diameter Range: 0.125 to 1.25 in (1/8 to 1 1/4 in)
- Length Range: 1.0 to 36.0 inches
- Wattage Range: 10 to 1200 W
The series is offered with high- and low-density options.
Configuration Options
Model numbers follow the format: SCH - Diameter - Length - Wattage - Termination - Lead Length - Voltage. The series supports a wide configuration envelope for mounting and electrical connections.
Diameter Options:
- 0125 (1/8 in)
- 0187 (3/16 in)
- 0250 (1/4 in)
- 0375 (3/8 in)
- 0500 (1/2 in)
- 0625 (5/8 in)
- 0750 (3/4 in)
- 1000 (1 in)
- 1250 (1 1/4 in)
Termination Types:
- N: Stripped leads
- B: Ceramic bead insulation
- BL: Ceramic bead and leads
- C1B: Straight armored cable, stainless steel
- C2B: Right-angle armored cable, stainless steel
- R1A: Right angle leads, copper elbow
- W: Straight wire braided leads
- M2A: Potted and sealed, fiberglass wires externally connected
- M2E: Potted and sealed, fiberglass wires internally connected
- W1A: Right-angle braided leads, cement potting, no lead wire and disc
- W1B: Right angle braided leads, cement potting, with lead wire and disc
- C3B: Right angle armored cable, cement potting and silicone varnish with lead end disc. Stainless steel cable
- R2B: Right angle leads, cement potting, welded lead end disc
- R3: Angled sheath extension (cement potting only)
- GL: Ground lead sheath
- M2C: High temperature epoxy potting, PFA wires internally connected
Lead Wire and Voltage:
- Standard Lead Length is 12 inches; longer lengths are available.
- Lead wire material is Fiberglass Insulated Lead Wire.
- Voltage codes: 1 (120 Volts AC), 2 (240 Volts AC).
A variety of cold-end terminations, mounting and threading options are available for maximum versatility. Non-standard wattage options are available on request.
Key Product Differences
The SCH series is defined by the 304 Stainless Steel sheath material. Distinctions between variants are established through specific diameter codes (e.g., 0125 to 1250), length increments, wattage ratings up to 1200 W, and termination styles ranging from stripped leads to armored cables and potted configurations.
PDFs & Manuals
