검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

KT011-Series

소형 컴팩트 디자인 온도 조절기

Small Compact Design Thermostat
재고가 있는 모델
옵션 제공:
  • 컴팩트 디자인
  • 넓은 조정 범위
  • °C 또는 °F 눈금 선택 가능
  • 색상 구분 온도 다이얼
KT011-Series
시작 $ 36.61
재고가 있는 모델
Small Compact Design Thermostat KT011-Series KT011-Series
loading all models
제품 개요
  • 현재 등급 15 A
  • 폼팩터 35mm DIN 레일용 클립
  • 높이 60 mm
  • 서킷 수 해당 없음
  • 최소 작동 온도 -45 °C
  • 시리즈 ID KT011-Series
  • 사용 수명 100,000 사이클
  • 보관 온도 최소 -45 °C
  • 공급 전압 120 ~ 250 Vac
  • 온도 범위 조절 가능
  • 무게 40 g
  • 폭 33 mm

Supported Applications

The Omega KT011-Series is a small, compact, DIN rail-mountable mechanical thermostat designed for use up to 5,000 meters in altitude. The series utilizes a thermostatic bimetal sensor element and snap-action contact output suitable for regulating heaters, filter fans, heat exchangers, and signal devices.

Operating Conditions & Performance

The KT011-Series operates within an ambient temperature range of -45 to +80 °C (-49 to +176 °F) with a maximum humidity rating of 90 % RH (non-condensing). Measurement ranges are available in two scales: +32 to +140 °F and 0 to +60 °C. The device features an accuracy class of ±7°F (4K) with a switch temperature difference (hysteresis) of 7 K (±4 K tolerance).

Electrical performance is rated for AC 250 V, 50-60 Hz operation. Switching capacity varies by voltage: 10 A at AC 250 V, 15 A at AC 120 V, and 30 W at DC 24-72 V. The maximum inrush current is rated for AC 16 A for 10 sec. Service life is verified to 100,000 cycles.

Configuration Options

The series offers configurable contact types and temperature scales with color-coded dials (red for NC, blue for NO). Key configuration parameters include:

  • Contact Type: Normally Closed (NC) or Normally Open (NO).
  • Setting Ranges: +32 to +140 °F or 0 to +60 °C.
  • Housing & Mounting: Plastic casing according to UL94 V-0, light grey; clip for 35 mm DIN rail (EN 60715).
  • Electrical Connection: 2 Push-In clamps supporting rigid wire up to 2.5 mm² (AWG 14) and stranded wire up to 1.5 mm² (AWG 16). Wire end ferrules must be used.
  • Approvals & Certifications: CE, cULus, DE, EAC, RoHS3, VDE; UL File No. E164102.

The enclosure rating is IP20 / II with an overvoltage category of II (up to 5,000 m) or III (up to 2,000 m). The fitting position is variable.

Key Product Differences

Variants within the KT011-Series are distinguished by their setting range and contact configuration. Model numbers follow the pattern KT011--. Specific examples include:

  • KT011409-U / KT011469-U: Thermostat, NC—open on rise (32 to 140°F or 0 to 60°C).
  • KT011419-U / KT011479-U: Thermostat, NO—close on rise (32 to 140°F or 0 to 60°C).

The contact system is subject to environmental influences which may change contact resistance; this can lead to a voltage drop and/or self-heating of the contacts. The level of switching current has an influence on tolerance accuracy.

ko-KR
en_IN
설정 저장