検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Series-WPTN

NSFプラスチック水道メーター(飲料用、農業・灌漑用)

  • プラスチック製、NSF認証のボディは飲料水用途に最適
  • マルチジェット設計により、低流量アプリケーションでもさまざまな流量範囲での精度を実現
  • 磁気駆動、気密封印されたレジスターは漏れや曇りがなく、水から完全に分離
  • 長寿命およびメンテナンスフリー運転を目的に設計
  • 一体型ストレーナーがパーティクルによるメーター損傷を防止
  • 付属のカップリングアダプターで設置が簡単
  • 流量に比例したパルス出力により遠隔流量集計が可能
Series-WPTN
販売元
NSFプラスチック水道メーター(飲料用、農業・灌漑用) Series-WPTN Series-WPTN
loading all models
製品の概要
  • 応用例 農業および水耕栽培の応用, 冷蔵, 冷蔵設備, 水質モニタリング
  • 材料、湿潤 ABS, PA
  • 対応媒体 プロセス水/冷却水
  • 取付方向 垂直方向
  • 動作温度(最高) 112 °F
  • 耐圧力 最大150 psi
  • シリーズID Series-WPTN

Supported Applications

The Dwyer Series WPTN Multi-Jet NSF Certified Plastic Water Meter is a mechanical water totalizing meter designed for potable use, agriculture, and irrigation. The series features NSF certification (NSF/ANSI 61) and utilizes plastic wetted materials to address applications where standard brass is not compatible or in corrosive environments involving fertilizers, pesticides, and herbicides.

Documented service areas include:

  • Potable water
  • Commercial water usage
  • Chiller water usage
  • Agriculture (fertilizers, pesticides, and herbicides)
  • Irrigation

Operating Conditions & Performance

The Series WPTN operates with a process temperature limit of 112°F (50°C) and a pressure rating of 150 psi (10 bar). Accuracy is specified as ±3% at minimum flow and ±1.5% at nominal flow.

Flow ranges vary by model size, covering the following documented envelopes:

  • Nominal Flow Range: 1 to 20 GPM
  • Nominal Flow Range: 2 to 30 GPM
  • Nominal Flow Range: 3 to 50 GPM
  • Nominal Flow Range: 5 to 100 GPM

Minimum flow thresholds correspond to the specific size, ranging from 0.25 GPM for smaller models up to 1.5 GPM for the largest sizes.

Configuration Options

The series is configured through a model number structure defining unit of measure, water temperature rating, physical size, and pulse rate options. The meters feature an analog totalizing display with a maximum capacity ranging from 9,999,999.99 to 99,999,999.9 gallons depending on the model.

Process Connections & Dimensions

The series supports multiple spud and coupling configurations:

  • Spud Size (BSSP): 5/8", 3/4", 1", 1-1/2"
  • Coupling Size (NPT): 1/2", 3/4", 1", 1-1/2"
  • Overall Length: Ranges from 6-1/2" [165 mm] to 11-13/16" [300 mm]
  • Weight: Ranges from 1.55 lb [0.7 kg] to 4.41 lb [2 kg]

Wetted Materials & Electrical Output

The wetted materials consist of a PA body, PA couplings, and an ABS plastic measuring chamber. The meters provide a pulse output with frequency proportional to flow rate via 3.5 mm² stranded lead wires (4.5' / 1.5 m long). Pulse options include:

  • 0.1 gal per pulse
  • 1 gal per pulse
  • 10 gal per pulse
  • 100 gal per pulse

Liter equivalents are also documented: 1 L, 10 L, 100 L, and 1000 L per pulse. The electrical rating is listed as 0.01A @ 24 VAC/DC.

Installation Requirements

The unit must be installed in a horizontal position with the meter face pointing up to prevent leakage or damage. Thread protectors should remain on spud threads during storage, and pipe sealant tape is not recommended for use on meter threads.

Key Product Differences

Variants within the Series WPTN are distinguished by physical size (Spud/Coupling combinations), maximum flow capacity, minimum flow thresholds, and pulse output resolution. The model number suffix indicates the specific configuration:

  • -A: Unit of measure in Gallons
  • -C: Cold water temperature rating (112°F / 50°C)
  • Sizes (-01 to -05): Define the Spud and Coupling dimensions, ranging from 5/8" x 1/2" up to 1-1/2".
  • Pulse Rate Suffixes: Blank (0.1 gal), -1 (1 gal), -10 (10 gal), or -100 (100 gal).

The Series WPTN is not field serviceable; repair attempts may void the warranty.

ja-JP
en_IN
設定を保存する