Need assistance? Call us: 1-800-663-4209
DP41-E-230
1/8 DIN High Performance Temperature, Process and Strain Meter
Choose a Variant
Supply Voltage
Control Output
Output Configurations
Ajouté à votre panier
Configuration complète.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer pour recommencer
Spécifications du produit
<< Voir tous les modèles de produit| Marque |
 |
| A/D Conversion | Dual-slope technique |
| Accuracy | ± 0.005 % |
| Common Mode Rejection | 120 dB |
| Common Mode Voltage | 1500 Vp per HV test |
| Control Output | None |
| Current Measurement Range | 0 to 20 mA, 4 to 20 mA |
| Cutout Dimensions | 45 x 92 mm |
| Data Interface | N/A |
| Display Color | Red, Green |
| Display Size | 13.7 mm (0.54 in) |
| Display Type | 6 Digit Single LED |
| Display Type Note | Red or green 6-digit, 14-segment, 13.7 mm (0.54") high; 4 alarm indicators |
| Enclosure Ratings | IP65, NEMA Type 4 |
| Form factor | 1/8 DIN |
| GrossWeightValue | 1.81 |
| Height | 48 mm |
| Input Type | Current, Voltage |
| Input Type Note | Analog Current/Voltage |
| Length | 165 mm |
| Normal Mode Rejection | 60 dB |
| Number of Inputs | 1 |
| Offset Adjustment | 0 to 999,999 or 0 to -99,999, programmable |
| Operating Temperature, Max | 50 °C |
| Operating Temperature, Min | 0 °C |
| Output Configurations | None |
| Output Configurations Note | None |
| Output Detail | Isolated, tri-state, TTL/CMOS compatible; external 5V supply required for isolated; internal 5V supply for non-isolated |
| Polarity | Unipolar/Bipolar, programmable |
| Power Consumption | 10 W |
| Power Consumption Note | 6 W nom., 10 W max |
| Reading Rate | 3/s or 13/s, 60 Hz; 3/s or 12/s, 50 Hz |
| Relative Humidity | 95% RH, non-condensing |
| Resolution | 15-bit |
| Sampling Rate | 13 Hz (13 updates/second) |
| Sensor Break Protection | Up-scale or down-scale, programmable |
| Sensor/Transmitter Power | 10 V at 30 mA; 24V at 25 mA |
| Series ID | DP41-Series |
| Setpoint | 4 isolated open collector; rated 150 mA at 1V sink, 30V open |
| Span Adjustment | 0.00001 to 500,000 counts, programmable |
| Step Response | 1 sec to 99.9% |
| Storage Temperature, Max | 85 °C |
| Storage Temperature, Min | -40 °C |
| Supply Power Note | 115 or 230 Vac, 49 to 400 Hz; 10 to 32 Vdc |
| Supply Power Type | AC |
| Supply Voltage | 230 Vac |
| Thermal Span Effect | ±20 ppm |
| Voltage Measurement Range | 0 to 100 mV, 0 to 1V, 0 to 5V, 1 to 5V, 0 to 10V, 0 to 100V, ±50 mV, ±500 mV, ±5V, ±50V |
| Warm-Up to Rated Accuracy | 50 min |
| Weight | 574 g |
| Width | 96 mm |
| Pays d'origine | Mexico |
| Voir toutes les spécifications | |
