検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

DPI-Series

1/32、1/16、1/8 DIN、プログラム可能温度/プロセスメーター

1/32, 1/16, 1/8 DIN, Programmable Temperature/Process Meters
  • ユニバーサル入力
  • ユーザーフレンドリーで簡単に設定可能
  • 高品質
  • 強力な機能
DPI-Series
販売元
1/32, 1/16, 1/8 DIN, Programmable Temperature/Process Meters DPI-Series DPI-Series
loading all models
製品の概要
  • A/D変換 デュアルスロープ
  • 追加機能 1 プログラム可能な3色ディスプレイ
  • 承認 UL、C-UL、UKCA、2014/35/EUに基づくCE
  • CMRR 120 dB
  • コンフィグレーション シングルエンド
  • 制御アクション 動作:逆(加熱)または順(冷却)
  • 制御出力 SPDTリレー、警報
  • カットアウト寸法 45 mm
  • デジタルフィルター プログラム可能
  • 表示範囲 -1999 ~ 9999
  • 表示タイプ 4桁LED
  • 電気接続 ネジ端子
  • 周波数 50~400 Hz
  • インピーダンス入力 100 mVで10 MΩ;1または10 Vdcで1 MΩ
  • 入力電流 0~20 mA (5 Ω負荷)
  • 絶縁 入力/出力への電源:2300 Vac、1分間試験 低電圧電源オプションの場合:1500 Vac、1分間試験 リレー/SSR出力への電源:2300 Vac、1分間試験 リレー/SSRからリレー/SSR出力への電源:2300 Vac、1分間試験 RS232/485から入力/出力への電源:500 Vac、1分間試験
  • 長さ 127 mm
  • 線形化ポイント 最大10
  • NMRR 60 dB
  • 入力数 1
  • 動作温度(最高) 55 °C
  • 動作温度(最低) 0 °C
  • 動作温度に関する注記 0~55°C(32~131°F)90%RH 非結露
  • 出力詳細 リレー:250 Vac または 30 Vdc @ 3 A(抵抗負荷);オン/オフ、PID、およびランプ&ソークに設定可能 出力1:SPDT、アラーム1出力として設定可能 出力2:SPDT、アラーム2出力として設定可能 SSR:20~265 Vac @ 0.05~0.5 A(抵抗負荷);連続 DCパルス:非絶縁;10 Vdc @ 20 mA アナログ出力(出力1のみ):非絶縁、比例 0~10 Vdc または 0~20 mA;最大500 Ω 出力3 再送信 絶縁アナログ電圧および電流 電流:最大10 V @ 20 mA 出力 電圧:0~10 V出力に対し最大20 mA
  • 極性 単極
  • 読み取りレート 3/秒
  • 相対湿度 0.9
  • サンプリングレート 3 Hz (3 更新/秒)
  • センサー/送信機の電源に関する注記 5 Vdc @ 40 mA; 10 Vdc @ 60 mA(通信の代わりにオプション)
  • シリーズID DPI-Series
  • スパン調整 0.001 ~ 9999 カウント
  • ステップ応答 99.9%に対して0.7秒
  • 熱効果 -1999 から 9999

Supported Applications

The DPI Series is a family of microprocessor-based digital panel meters from the OMEGA® iSeries, built for temperature, process, and strain measurement in industrial monitoring and control panels. Offered in three true DIN sizes with NEMA 4 (IP65) rated front bezels, these instruments drop into machine consoles, process skids, and instrumentation cabinets where a clear, configurable digital readout is required.

Universal temperature and process models accept a broad selection of thermocouple, RTD, and process transducer and transmitter inputs, while dedicated strain and process models handle load, pressure, and voltage or current signals. With optional serial and Ethernet communications, the DPI Series suits data acquisition, remote monitoring, and networked plant systems as readily as standalone panel indication.

Operating Conditions & Performance

DPI meters run on a universal supply of 90 to 240 Vac ±10%, 50 to 400 Hz, with a low-voltage DC option covering 12 to 36 Vdc and 24 Vac. They deliver a fast display response of 0.7 sec for 99.9% of a step change, resolving temperature to 0.1°C and process inputs down to the microvolt level.

Universal temperature and process inputs span wide measurement ranges depending on sensor type, including a J thermocouple range of -210 to 760°C (-346 to 1400°F) and a K thermocouple range up to -160 to 1372°C (-256 to 2502°F), with thermocouple accuracy as tight as 0.4°C (0.7°F). The instruments operate over an ambient range of 0 to 55°C (32 to 131°F) at up to 90% RH non-condensing, and their NEMA 4/IP65 front bezel protects the display against dust and wash-down in the panel face.

Configuration Options

The DPI Series differentiates its models along several clear axes so a configuration can be matched to the panel and the signal:

  • DIN size — models are offered in 1/8, 1/16, and 1/32 DIN formats to fit the available cutout, all sharing a common 127 mm case depth.
  • Input class — DPi models cover universal temperature and process inputs, while DPiS models are configured for strain and process signals.
  • Analog output — the A designation (for example DPi8A and DPi16A) adds a proportional analog retransmission output.
  • Compact depth — the C designation (for example DPi8C and DPiS8C) provides a reduced-depth housing for shallow enclosures.

Communications and power options are added through ordering suffixes: -EIT for Ethernet with embedded internet, -C24 for isolated RS232 and RS485, -C4EIT for an Ethernet Web server plus an isolated RS485/422 hub, and -DC for the low-voltage DC power input.

Key Product Differences

The core DPI lineup is organized by DIN size, input class, and feature set:

  • DPi8, DPi8A, DPiS8, and DPi8C/DPiS8C — 1/8 DIN temperature/process, analog-output, strain/process, and compact-depth models.
  • DPi16, DPi16A, and DPiS16 — 1/16 DIN temperature/process, analog-output, and strain/process models.
  • DPi32 and DPiS32 — 1/32 DIN temperature/process and strain/process models.

Each base model can be extended with the communications and power suffixes above, and the range is supported by the DPP-5 1/8 DIN panel punch accessory for preparing the panel cutout.

DPIS321616A88A8C-C24-EIT-C4EIT-DC-FS
Input Type
Case Size
Network Options
Power Supply
Factory Setup
ja-JP
en_IN
設定を保存する