United Kingdom 0800 488 488 | Intl +44 (0) 161 777 6611 | Welcome to our new website, found an issue or bug? Please report it here
FP1400-Series
Indicating Plastic Paddlewheel Flow Meter W/Alarms & Totalizers
Models In Stock
- Polypropylene or PVDF Models
- 29 Engineering Units (Including User Defined)
- Two Programmable Totalizers
- Programmable Alarms
FP1400-Series
From
£
807.79
Models In Stock
Product Overview
- Accuracy ± 1 %
- Alarm Types 2
- Approvals CE
- Approvals Note EMC Compliance with 89/336/EEC as amended. Emission Standard: EN 55011:1991, Group 1, Class A Immunity Standard: EN 55082-1:1992
- Data Interface RS232
- Digital Output Note UCE 40 Vdc, ICE 150 mA
- Display Type LCD
- Display Type Note Optional local 2 x 16 characters LCD with adjustable backlight (2 lines of text),Optional 4 pushbutton key pad
- Electrical Output 4 to 20 mA, 0 to 5 Vdc
- Operating Pressure, Max 150 psi
- Operating Pressure, Min 0 psi
- Operating Temperature, Max 60 °C
- Operating Temperature, Min -10 °C
- Output Detail Linear 0 to 5 Vdc (3000 Ω minimum load impedance); linear 4 to 20 mA (500 Ω maximum loop resistance). Maximum noise 20 mV peak to peak (for 0 to 5 Vdc output); Flow Pulse Output: 3.3 Vdc
- Pressure Drop Note Maximum Pressure Drop: @ 15 psi for sized units @ 20 psi all other sizes
- Measurement Pressure Type Gauge
- Process Connection Type NPT Female
- Process Temperature, Max 60 °C
- Process Temperature, Min 0 °C
- Repeatability Error ±0.25%
- Response Time 1 s
- Response Time Note Approx 1 sec (above 10% of full scale flow), approx 2 seconds (below 10% of full scale flow)
- Series ID FP1400-Series
- Supply Power Note 11 to 26 Vdc, 100 mV maximum peak to peak output noise, Consumption: +12 Vdc (150 mA maximum); +24 Vdc (100 mA maximum); circuit board have built-in polarity reversal protection, 300 mA resettable fuse provide power input protection.
- Temperature Accuracy ± 0.5 °C
- Viscosity Note 1 cSt (water) can be used for liquids up to 50 cSt with field calibration (max flow range may be affected
Supported Applications
The Omega FP1400 Series consists of digital plastic paddlewheel flow meters designed to measure fluid flow rate and total volume. These units are configured for use with liquids up to 50 cSt viscosity, including water, oil, chemicals, and clean liquids. The series supports applications requiring user-programmable alarms, two independently programmable flow totalizers, and RS232/RS485 communications.
Operating Conditions & Performance
The FP1400 Series operates with a process temperature of 60°C (140°F) and an ambient operating temperature range of -10 to 60°C (14 to 140°F). The maximum pressure rating is 10 bar (150 psig), with flow ranges available from 0.5 to 35 GPM depending on the specific model configuration.
Performance specifications include a flow accuracy of ±1% of FS and repeatability of ±0.25% of FS. When equipped with an optional RTD temperature sensor, temperature accuracy is specified as ±0.5°C including linearity. The response time is approximately 1 second above 10% of full scale flow and approximately 2 seconds below 10% of full scale flow.
Key Performance Metrics
- Flow Accuracy: ±1% of FS (including linearity)
- Repeatability: ±0.25% of FS
- Temperature Accuracy (RTD option): ±0.5°C (including linearity)
- Response Time: Approx 1 sec (>10% full scale), approx 2 seconds (<10% full scale)
- Power Supply: 11 to 26 Vdc
- Enclosure Rating: NEMA 4X (IP67)
Configuration Options
The series is offered in two primary housing material configurations: Polypropylene and PVDF. Models are available with various NPT port sizes including 1/8, 1/4, 1/2, and 1 inch to match specific flow ranges from 0.5 GPM up to 35 GPM.
Output Signals & Interfaces
The FP1400 Series supports multiple output configurations:
- Analog Outputs: Linear 0 to 5 Vdc (minimum load impedance 3000 Ω) or linear 4 to 20 mA (maximum loop resistance 500 Ω).
- Pulse Output: Flow pulse output with 3.3 Vdc amplitude.
- Digital Communication: RS232/RS485 interface support.
- Optically Isolated Outputs: UCE 40 Vdc, ICE 150 mA.
Sensor & Wetted Materials
Polypropylene models feature a polypropylene body with an acrylic lid, PVDF paddlewheel, nickel tungsten carbide shaft, sapphire jewel bearings, and EPDM O-rings. The RTD sensor in these units utilizes a 316 SS casing.
PVDF models utilize a PVDF body and lid, PVDF paddle wheel, zirconia ceramic shaft, sapphire jewel bearings, PTFE O-rings, and an RTD with a 316 SS casing. All electrical connections are made via a built-in female 12-pin M16 connector rated NEMA 4X (IP67).
Key Product Differences
The FP1400 Series distinguishes between Polypropylene and PVDF construction materials, which dictate the specific wetted parts composition. Model numbers follow a pattern indicating material type and port size; for example, models starting with "FP140" denote Polypropylene bodies (e.g., FP1402, FP1404), while those starting with "FP141" indicate PVDF construction (e.g., FP1412, FP1414).
Each base model is available in two configurations: a standard version and an RTD-equipped version. The suffix "-RTD" identifies units equipped with the optional temperature sensor. Port sizes range from 1/8 NPT to 1 NPT, correlating directly to specific flow ranges such as 0.5 to 5 GPM for 1/8 inch ports up to 3.5 to 35 GPM for 1-inch ports.
Accessories include the DPF701 (a 1/8 DIN digital display powered by 115 Vac or 7.5 to 13 Vdc) and the FP1400-CABLE, a 2 m (6') cable with a 12-pin connector.
PDFs & Manuals
