HX300A-Series

Humidity/Temperature Transmitters

Models In Stock

Fast, Stable and Accurate
Watertight Enclosure
Compact, Easy to Use
Excellent Long-Term Stability

See Product Overview

HX300A-Series

From ^£ 234.57

Models In Stock

Shop Models

4 Variations available

See all series options below

Data Sheet

Product Overview

Accuracy ±2.5 % RH, ±0.3°C
Electrical Connection Cable Gland for 5 to 10 mm Wire with Screw Terminal block
Enclosure Ratings IP65
Long Term Stability Better than 1% RH per year (typical)
Materials, Wetted ABS
Operating Temperature, Max 50 °C
Operating Temperature, Min 0 °C
Response Time 15 sec
Sensor Material Sintered filter
Series ID HX300A-Series
Supply Power Type DC
Supply Voltage 12 to 40 Vdc
Temperature Compensation 0.008% RH/°C (effect @ 05 RH)
Weight 150 g

Supported Applications

The Omega HX300A Series consists of wall-mount transmitters designed for industrial environments requiring fast, stable, and accurate measurements. The series employs a highly stable thin-film polymer capacitor to sense relative humidity and a high-accuracy, thin-film RTD (PT100 Ω) compliant with IEC 751 and DIN 43760 standards to accurately sense temperature.

Operating Conditions & Performance

The HX300A Series operates within an ambient temperature range of 0 to 50°C (32 to 122°F). Measurement capabilities include a humidity range of 0 to 100% RH @ 0 to 50°C (32 to 122°F) and a temperature measurement range of 0 to 100°C (32 to 212°F).

Performance specifications at 25°C include an accuracy of ±2.5% RH, ±0.3°C with long-term stability better than 1% RH per year (typical). The response time is <15 seconds (90% @ 25°C in moving air at 0.5 m/sec), and temperature compensation is rated at 0.008% RH/°C (effect @ 05 RH).

The unit features a sintered filter for sensor protection and utilizes an ABS plastic watertight enclosure to NEMA 4 (IP65). Electrical connections are provided via liquid-tight nylon cable bushing fitting 5 to 10 mm dia. (0.2 to 0.4") cables.

Key Specifications

Housing: ABS plastic watertight enclosure to NEMA 4 (IP65)
Sensors - Humidity: Thin-film capacitor
Sensors - Temperature: RTD PT100 Ω, IEC 751, DIN 43760
Weight: Approx 150 g (5.3 oz)
Approvals/Certifications: CE, NIST-traceable calibration available via CAL-3-HU accessory

Configuration Options

The series supports multiple output configurations and sensor combinations to address specific monitoring needs. Power supply requirements are 12 to 40 Vdc (24 Vdc recommended).

Output Signals

Current Output: 4 to 20 mA, 2-wire with ±15% scalable zero and span adjustment.
Voltage Output: 0 to 1 V (primary series specification).

Sensor Configurations

Humidity only models (HX302A family)
Temperature and Humidity combined models (HX303A family)

Accessories & Options

The series is offered with various power supply options including:

PSR-24S: Regulated power supply, US plug, 90 to 264 Vac input, 24 Vdc output, 400 mA, screw terminals, UL.
PSR-24L: Regulated power supply, US plug, 90 to 264 Vac input, 24 Vdc output, 400 mA, stripped leads, UL.
PSR-24L-230: Regulated power supply, European plug, 230 Vac input, 24 Vdc output, 400 mA, stripped leads, CE.
PSU-93: Unregulated power supply, 16 to 23 Vdc, 300 mA max, screw terminal.

Key Product Differences

The HX300A Series is differentiated by sensor type and output signal format. The model number guide follows the pattern: HX300A - <MODEL> - <OUTPUT TYPE>.