Need assistance? Call us: 1-800-663-4209
PX409-Series
Configurable, High Accuracy Pressure Transducers
Models In Stock
- FAST DELIVERY!
- Fast Response Time
- High ± 0.08% BSL Accuracy
- High Precision Performance
PX409-Series
From
C$
1,223.75
Models In Stock
Can't find the right model?
Use our custom configurator to fine tune your product
Product Overview
- Accuracy Class < 0.1%
- Bandwidth DC to 1 kHz
- Insulation Resistance 100 MΩ @ 50 Vdc
- Materials, Wetted 316L Stainless Steel
- Pressure Cycles 1 million, minimum
- Process Connection Size 1/4 in
- Response Time <1 ms
- Series ID PX409-Series
- Shock 50 g, 11 ms half-sine
- Stability ± 0.1%
- Stability Note Long Term Stability (1-Year): ± 0.1% FS typical
- Vibration 5-2000-5 Hz, 30 minute cycle,Curve L, Mil-Spec 810 figure 514-2-2, vertical and horizontal axis
- Weight 200 g
Supported Applications
Omega pressure transducers and transmitters are documented for aerospace, automotive, test, and industrial applications. The series includes gauge, absolute, differential, vacuum, compound, and barometric pressure configurations.
Operating Conditions & Performance
The series uses a solid-state piezoresistive design with high-temperature performance, NIST traceable calibration, and documented pressure range selections.
Configuration Options
- Documented output choices include mV/V, voltage, and current signals.
- Electrical termination choices include cable, mini-DIN, twist-lock, and M12 connector styles.
- Available pressure configurations include gauge, absolute, differential, vacuum, compound, and barometric types.
Key Product Differences
Product variations differ by pressure configuration, output signal, pressure range, and electrical termination. The series-specific source also documents stainless steel construction and wetted parts for applicable configurations.
PDFs & Manuals
Software & Drivers
Accessories
accessories
cables
DC Cable Assemblies for Probes, Sensors and Transmitters
C$39.82 / each
78 In Stock
DC Cable Assemblies for Probes, Sensors and Transmitters
C$39.82 / each
16 In Stock
installation hardware
meters/controllers
1/8 DIN Thermocouple and RTD Panel Meter with Large, Selectable Color Display
C$707.44 / each
0 In Stock
1/8 DIN Thermocouple and RTD Panel Meter with Large, Selectable Color Display
C$707.44 / each
0 In Stock
High Performance Strain gauge Meter, High Resolution 6-Digit Display
C$1,515.23 / each
0 In Stock
Show Ratings & Reviews
You can specify the "pressure type" measurement as "gauge" or "vacuum". What exactly does the vacuum pressure type mean? It is the same as absolute pressure?
Vacuum pressure type means it's a sensor scaled to measure vacuum reference to Gage (reference is vented to the atmosphere). This is different than an Absolute unit which is reference to a sealed internal vacuum reference.
Date published: 2020-12-01
Is there an option to add grid lines to the charting area?
There is no option to add grid lines to the charting area.
Date published: 2021-03-23
PX409-SERIES CAN IT BE USED WITH HYDRAULIC FLUIDS ?
Yes it can. The wetted parts of the PX409 Series transducer are all stainless-steel.
Date published: 2026-07-28
Can the PX409 series be used to measure oil pressure? I cannot find any info stating the acceptable mediums.
Thanks for your Question. The PX409-001CG10V is a 316 Stainless Steel unit that can be used to measure oil. Please check your oil chemical compatibility with 316SS. Please call or email us at pressure@omega.com with any further questions.
Date published: 2019-06-20
Will MMDDB2.5BIV10P4C5T1A3, listed as bi-directional differential pressure, 0-2.5 psi, read vacuum if the low port is connected to the vacuum process and the high port open to atmosphere? Will it work with both ports across different vacuums?
If you connect a vacuum to the low and leave the high port open to atmosphere the unit will output 0 to -10VDC if a vacuum id applied to the LOW port. If you apply varying vacuums to both ports the unit will respond with a sign representing the difference between the vacuums applied ranging from -10VDC to +10VDC
Date published: 2022-03-21
What is the resolution limit on this device? I'm interested in your 0-2 bar sensor and what the lowest pressure value it is able to measure accurately.
Resolution would depend on how small of a signal change the instrumentation used to read the 0 to 10VDC output can resolve. The sensor will read from 0 to 2 bar but the lower 10% of the range (0 to 0.2 bar) would end to be less accurate
Date published: 2022-03-01
Are the high accuracy transducers rated for use with hydrogen?
We do not recommended using our transducers in a hydrogen application due to embrittlement of the wetted parts when exposed to hydrogen
Date published: 2022-02-10
Hi, we have a PX409-16BI transmitter that we are developing a validation procedure for. Stated zero and span tolerances are +/- 0.5% FS typical with a +/- 1% FS maximum. Which should I use for validation? (BSL is not a validation tolerance)
You would use the +/- 1% FS max
Date published: 2020-06-12