1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
OM-DVCV
AC Current and Voltage Data Logger with Display
Choose a Variant
Measurement Type
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Alarm Note | Visual over and under alarm indicator for current and voltage; watts alarms are not available |
| Battery Size and Type | Alkaline AA |
| Battery life | up to 1 yr |
| Current Measurement Range | 1 to 300 Aac |
| Data Interface | USB |
| Display Note | Text Display: Displays real time current, voltage and watts; displays logging summary, sample rate, memory used and memory left. Graph Display: Shows measurement trends graphically; graph can be scrolled through the entire logged data. |
| Display Type | LCD |
| File Formats | excel, Text |
| GrossWeightValue | 1.57 |
| Height | 1.5 in |
| Length | 3.05 in |
| Measurement Type | AC Current, AC Voltage |
| Number of Measurements | 1 |
| Operating Temperature, Max | 65 °C |
| Operating Temperature, Min | -10 °C |
| Real Time Recording | Visual indication through the status LED. Software real time status |
| Resolution | Current: 0.2 A, Voltage: 0.2 V |
| Sampling Rate | 1 Hz (1 update/second) |
| Sampling Rate Note | 1 Second to 9 hours |
| Series ID | OM-DVCV-Logger |
| Software | Windows XP/Vista/7, 8, 10 |
| Start Modes | Adjustable Delay Start, Immediate Start |
| Stop Modes | When Memory is Full |
| Storage Capacity | 43,344 points for current or voltage only; 21,672 points for current and voltage |
| Storage Temperature, Max | 70 °C |
| Storage Temperature, Min | -20 °C |
| Supply Power Type | Battery |
| Time Accuracy | ±100 ppm @ 24°C (75°F) |
| USB Cable Length | 6 ft |
| Variables Logged | User Selectable; Disabling channels increases the storage capacity of the other channels |
| Voltage Measurement Range | 1 to 600 Vac |
| Weight | 200 g |
| Width | 4 in |
| Country of Origin | China |
| See All Specs | |
PDFs & Manuals
Software & Drivers
Show Ratings & Reviews
Rated 5 out of
5
by
Achilleas from
Easy to use and reliable logger
Great logger! Used it to log voltage and current simultaneously for a few days. Did the job and provided all the data needed. Very good system.
Date published: 2021-03-03
Rated 2 out of
5
by
RLIves4 from
Still trying to get a working unit
I purchased this unit, and it failed to work right out of the box. The software did not automatically install as required, leaving us puzzled and unable to do anything. We were able to display measurements on the unit, but only the voltage appeared to work. The current reading always indicated 0.0, even with a test circuit where we had other meters attached. It required a couple of tech support calls before the unit was diagnosed as defective. I'm hoping the replacement works as designed.
Date published: 2018-10-10
Rated 5 out of
5
by
Mr Monck from
Consistent
Qmega logger consistently logs data and the software recognizes the logger each time data is downloaded. Minor problem initially with usb driver not on the mini cd supplied. Went to omega website found it and downloaded. Works well and interesting trends showing up.
Date published: 2018-08-01
Rated 5 out of
5
by
BrianR from
Great value
We are measuring the site load of an existing off-grid installation, and the unit has been ideal. Very easy to use out of the box. The only issue is that the it takes a little fiddling to get the USB driver to work, but that is minor.
Date published: 2018-06-17
Rated 5 out of
5
by
Dave H from
Nice Unit
Nice little unit to measure both current & voltage. I used this device to monitor the cycle time of an air compressor motor. I was able to set it to sample the voltage every 30 seconds over a two week period. The only negatives are the size of the included alligator clips which were too large for my application. Also, you need to visit the Omega website to download the correct software. It is available for various computer operating systems which were not included in the package.
Date published: 2018-05-18