Need assistance? Call us: 1-800-663-4209
FMG80A-Series
1/4 in to 3/4 in Pipe/Tube, Low Flow Electromagnetic Flow Meter
Models In Stock
- No Moving Parts
- Requires No Straight Pipe
- Chemical and Corrosion Resistant
- Insensitive to Fluid Density and Fluid Viscosity Changes
FMG80A-Series
From
C$
2,491.76
Models In Stock
Product Overview
- Accuracy ± 1 %
- Cable Length 6 m
- Conductivity > 20 µS/cm
- Electrical Connection 8-pin mini DIN
- Enclosure Ratings IP66, NEMA Type 4X
- Materials PVDF
- Materials, Wetted PVDF
- Media Compatibility Conductive liquids, Corrosive chemicals / acids / bases, Saltwater / brines
- Number of Outputs 1
- Operating Pressure, Max 150 psi
- Operating Temperature, Max 54 °C
- Operating Temperature, Min -18 °C
- Output Detail Optocoupled current sinking or current sourcing pulse output; 30 Vdc, 5 mA max, 4 to 20 mA current loop; 7 Vdc plus load voltage drop min; 50 Vdc max
- Output Signal Current
- Process Connection Note Fittings with two NPT threaded adaptors (included)
- Process Connection Type NPT Male
- Process Temperature, Max 93 °C
- Process Temperature, Min 0 °C
- Series ID FMG80A-Series
- Supply Power Note 10 to 15 Vdc, 150 mA (linear power supply recommended)
- Supply Power Type DC
- Supply Voltage 10 to 15 Vdc
- Weight 0 lb
The FMG80A Series magmeter is designed for low-flow chemical injection or difficult-to-meter applications with pulsating metering pumps in ¼ to ¾" pipe/tube. The housing is made of sturdy splash-proof HDPE plastic.
With no moving parts, the FMG80A Series can handle fluids containing particulate matter without clogging or jamming, keeping maintenance at a minimum. With no metallic parts (100% PVDF body and PVDF carbon fiber-filled electrodes), the meter is corrosion-resistant and compatible with a wide range of chemicals. Accuracy is maintained with conductive fluids (>20 micro Siemens) of varying viscosities and densities.
The FMG80A Series meter is compact enough to fit most pump/ injection systems. With zero straight pipe required after an elbow, it can be easily mounted in tight spaces. The mounting bracket adds stability. The FMG80A Series meter has opto-coupled current sinking or current sourcing pulse as well as a 4 to 20 mA output that can be connected to many OMEGA panel meters, controllers and data loggers; outputs and power are provided through a 6 m (19.7') cable with 8-pin female circular connector.
With no moving parts, the FMG80A Series can handle fluids containing particulate matter without clogging or jamming, keeping maintenance at a minimum. With no metallic parts (100% PVDF body and PVDF carbon fiber-filled electrodes), the meter is corrosion-resistant and compatible with a wide range of chemicals. Accuracy is maintained with conductive fluids (>20 micro Siemens) of varying viscosities and densities.
The FMG80A Series meter is compact enough to fit most pump/ injection systems. With zero straight pipe required after an elbow, it can be easily mounted in tight spaces. The mounting bracket adds stability. The FMG80A Series meter has opto-coupled current sinking or current sourcing pulse as well as a 4 to 20 mA output that can be connected to many OMEGA panel meters, controllers and data loggers; outputs and power are provided through a 6 m (19.7') cable with 8-pin female circular connector.
PDFs & Manuals
Show Ratings & Reviews
Rated 4 out of
5
by
Mechanical Engineer from
Great purchase, will purchase again.
Mechanical install was very easy and the included mounting bracket made the install fast. My only issue was the electrical setup which I needed some help with but that was fixed quickly with a phone call to support.
Date published: 2023-12-29
Rated 4 out of
5
by
righton from
The unit works great and is very accurate.
Just 1 question. The unit stops outputting at .3L/min instead of the .1L/min after the conversion from gallons.
Date published: 2017-04-04