Need assistance? Call us: 1-800-663-4209
FMG83A
LOW FLOW MAGMETER
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 1 % |
| Accuracy Detail | ± 1%, ± 0.005 GPM of reading across |
| Cable Length | 6 m |
| Conductivity | > 20 µS/cm |
| Electrical Connection | 8-pin mini DIN |
| Enclosure Ratings | IP66, NEMA Type 4X |
| GrossWeightValue | 3.93 |
| K-Factor | 1892 pulses/gal |
| Materials | PVDF |
| Materials, Wetted | PVDF |
| Media Compatibility | Conductive liquids, Corrosive chemicals / acids / bases, Saltwater / brines |
| Number of Outputs | 1 |
| Operating Pressure, Max | 150 psi |
| Operating Temperature, Max | 54 °C |
| Operating Temperature, Min | -18 °C |
| Output Detail | Optocoupled current sinking or current sourcing pulse output; 30 Vdc, 5 mA max, 4 to 20 mA current loop; 7 Vdc plus load voltage drop min; 50 Vdc max |
| Output Signal | Current |
| Pipe Size, Max | 0.5 in |
| Process Connection Note | Fittings with two NPT threaded adaptors (included) |
| Process Connection Size | 1/2 in |
| Process Connection Type | NPT Male |
| Process Temperature, Max | 93 °C |
| Process Temperature, Min | 0 °C |
| Series ID | FMG80A-Series |
| Supply Power Note | 10 to 15 Vdc, 150 mA (linear power supply recommended) |
| Supply Power Type | DC |
| Supply Voltage | 10 to 15 Vdc |
| Volumetric Flow Rate, Max | 20 GPM |
| Volumetric Flow Rate, Min | 0.2 GPM |
| Weight | 0 lb |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews