India +91 8925807296 | Welcome to our new website, found an issue or bug? Please report it here
TX86-Transmitter
Programmable Head Mount Temperature Transmitter for Thermocouples
Models In Stock
- Universal input: RTD, thermocouple, resistance, potentiometer, and mV signals.
- 1000 VRMS galvanic isolation eliminates ground loop interference.
- 16-bit converters ensure high accuracy with linear 4–20 mA output.
- Bright 4-digit LED display shows values in °C, °F, or %.
TX86-Transmitter
From
AUD
1,164.02
Models In Stock
Product Overview
- Accuracy ± 0.2 %
- Accuracy Detail ± 0.2% of full scale input
- Cold Junction Compensation ±2°C
- Diameter 62 mm
- Conexión eléctrica Screw Terminal
- Salida eléctrica 4 to 20 mA
- Altura 42 mm
- Material del alojamiento Plastic, Polycarbonate
- Rango de humedad 20 to 90% RH non-condensing
- Resistencia de entrada 0 to 2000 Ω
- Montaje Head-mounted
- Temperatura de operación, máx. 70 °C
- Temperatura de operación mínima -20 °C
- Carga de salida 50 x (Vsupply – 12V) Ω
- Longitud de la sonda 0 mm
- Resolución 2 μA
- Tiempo de respuesta 1 sec with dampening off
- Tipo de sensor Transmitter
- ID de serie TX86-Transmitter
- Controles de configuración 3 pushbuttons on front
- Material de la funda N/A
- Intervalo, mínimo 50°C
- Estabilidad ± 0.15%/ year (Long Term Stability)
- Temperatura de almacenamiento, máx. 70 °C
- Temperatura de almacenamiento, mínima -20 °C
- Suministrar corriente de alimentación 30/150 µA ± 2%
- Alimentación Nota 12 to 30 Vdc, LED indicator reverse polarity protected 60 Vdc
- Tipo de alimentación eléctrica DC
- Tensión de alimentación 12 to 30 Vdc
- Rango de entrada de temperatura 0 to 260 °C
- Peso 80 g
Supported Applications
The Omega TX86 is a programmable, head-mount temperature transmitter designed for universal input signal conditioning. It converts signals from thermocouples, RTDs (Resistance Temperature Detectors), millivolts, volts, potentiometers, and ohms into linearized 4-20 mA DC loop current outputs. The series supports integration with DCS, PLC, PC, SCADA systems, or recorders for industrial process monitoring.
Operating Conditions & Performance
The TX86 operates within an ambient temperature range of -20 to 70°C (-4 to 158°F) and a relative humidity of 20 to 90%, non-condensing. The unit features galvanic isolation with a rating of 1000V RMS continuous between input and output circuits.
Performance specifications include an accuracy of ± 2% of full scale input, a resolution of 2 µA, and a response time of 1 second with dampening off. Long-term stability is rated at ± 0.15%/year, with a temperature coefficient of ± 0.01%/°C (5 to 50°C). The device includes self-diagnostic capabilities for sensor open-circuit and short-circuit detection.
Configuration Options
The TX86 series supports multiple input types with specific measured ranges:
- Thermocouples: K (-100 to 1372 °C), J, T, E, R, N, S, B (400 to 1800 °C).
- RTDs: Pt100, Pt500, Pt1000 (-200 to 850/200 °C), Ni120, Cu10.
- Other Inputs: Resistance (0 to 2000 Ω), Potentiometer (0 to 2000 Ω), mV (-5 to 60).
The transmitter is configured via three push-buttons on the front panel and features a 4-digit, 7-segment bright LED display. It supports output configurations of 4-20 mA or 20-4 mA (reverse action) with a maximum load resistance calculated as 50 x (Vsupply - 12V) Ω. An optional solid-state relay alarm output is available with a 30 mA maximum rating.
Power requirements are met by a loop-powered supply of 12 to 30 Vdc, which includes reverse polarity protection up to 60 Vdc. The housing material is plastic (polycarbonate) with overall dimensions of 62 mm Dia x 42 mm H (2.44 x 1.65 in).
Key Product Differences
The TX86 model number guide follows the format: TX86 - <Input Type> - <Configuration> - <Output> - <Power Supply>. While the primary unit is a 2-wire loop-powered transmitter, optional power supplies are available for standalone or specific installation needs:
- PSR-24S: Regulated power supply, 24 Vdc, 400 mA, screw terminal.
- PSR-24L: Regulated power supply, 24 Vdc, 400 mA, UL, stripped leads.
- PSR-24L-230: Regulated power supply, 24 Vdc, 400 mA, stripped leads, 230 Vac input, CE.
- PSU-93: Unregulated power supply, 16 to 23 Vdc, 300 mA max, screw terminal.
PDFs & Manuals